| 1 | Investigation inti the effect of temper condition on frictio… (10.4149/km_2013_3_155) | Abstract References ORCID License | 177.82 | 59 |
| 2 | Mechanical and microstructural behaviour of wear resistant c… (10.4149/km_2018_1_55) | Abstract References ORCID License | 177.82 | 59 |
| 3 | Solidification of A356 Al alloy: Experimental study and mode… (10.4149/km_2011_4_253) | Abstract References ORCID License | 154.41 | 34 |
| 4 | Mechanical properties of carbide-free lower bainite in compl… (10.4149/km_2020_2_129) | Abstract References ORCID License | 146.24 | 28 |
| 5 | Effect of welding speed on the mechanical properties and wel… (10.4149/km_2016_3_241) | Abstract References ORCID License | 143.14 | 26 |
| 6 | Squeeze casting of electromagnetically stirred aluminum matr… (10.4149/km_2017_1_33) | Abstract References ORCID License | 139.79 | 24 |
| 7 | Some properties of Cu-SiC composites produced by powder meta… (10.4149/km_2011_2_131) | Abstract References ORCID License | 136.17 | 22 |
| 8 | High-temperature compression of closed cell aluminium foams (10.4149/km_2016_6_429) | Abstract References ORCID License | 134.24 | 21 |
| 9 | Applicability of empirical formulas and fractography for ass… (10.4149/km_2017_2_69) | Abstract References ORCID License | 127.88 | 18 |
| 10 | Effect of coated B4C reinforcement on mechanical properties… (10.4149/km_2012_2_107) | Abstract References ORCID License | 125.53 | 17 |
| 11 | Properties and processing of magnesium-tin-calcium alloys (10.4149/km_2011_3_163) | Abstract References ORCID License | 123.04 | 16 |
| 12 | Thermal expansion of Cu-graphite composites: effect of coppe… (10.4149/km_2011_6_411) | Abstract References ORCID License | 123.04 | 16 |
| 13 | Influence of cooling rate and cerium addition on rapidly sol… (10.4149/km_2010_1_1) | Abstract References ORCID License | 120.41 | 15 |
| 14 | The effects of welding speed on the microstructure and mecha… (10.4149/km_2019_5_307) | Abstract References ORCID License | 120.41 | 15 |
| 15 | Fatigue strength of submicrocrystalline Ti and Zr-2.5%Nb all… (10.4149/km_2011_1_65) | Abstract References ORCID License | 117.61 | 14 |
| 16 | Research on durability of turning tools made of low-alloy hi… (10.4149/km_2016_1_17) | Abstract References ORCID License | 117.61 | 14 |
| 17 | Friction stir welding of dissimilar joint of aluminum alloy… (10.4149/km_2016_1_71) | Abstract References ORCID License | 117.61 | 14 |
| 18 | Modelling and optimization of submerged friction stir weldin… (10.4149/km_2016_3_297) | Abstract References ORCID License | 117.61 | 14 |
| 19 | Characterization of microstructure and strength of microwave… (10.4149/km_2016_1_27) | Abstract References ORCID License | 114.61 | 13 |
| 20 | Effect of nitrogen on surface morphology of layers (10.4149/km_2016_2_119) | Abstract References ORCID License | 114.61 | 13 |
| 21 | The effect of cryogenic treatment on ageing behaviour of B4C… (10.4149/km_2017_1_57) | Abstract References ORCID License | 114.61 | 13 |
| 22 | Effect of microstructure on corrosion behavior of dual-phase… (10.4149/km_2017_2_133) | Abstract References ORCID License | 114.61 | 13 |
| 23 | Effects of cryogenic treatment on residual stresses of AISI… (10.4149/km_2018_3_153) | Abstract References ORCID License | 114.61 | 13 |
| 24 | A novel method based on probability theory for simultaneous… (10.31577/km.2022.1.45) | Abstract References ORCID License | 111.39 | 12 |
| 25 | Unidirectional solidification of aluminium-nickel eutectic a… (10.4149/km_2010_5_291) | Abstract References ORCID License | 111.39 | 12 |
| 26 | Effect of particle size and volume fraction of the reinforce… (10.4149/km_2013_4_221) | Abstract References ORCID License | 111.39 | 12 |
| 27 | On the ballistic performance of the AA7075 based functionall… (10.4149/km_2013_4_257) | Abstract References ORCID License | 111.39 | 12 |
| 28 | Assessment of microstructure stability and mechanical proper… (10.4149/km_2016_1_61) | Abstract References ORCID License | 111.39 | 12 |
| 29 | Erosion wear evaluation of HVOF sprayed WC-12Co coating on s… (10.4149/km_2019_1_113) | Abstract References ORCID License | 111.39 | 12 |
| 30 | Correlation between shear punch and tensile measurements for… (10.4149/km_2011_1_43) | Abstract References ORCID License | 107.92 | 11 |
| 31 | Bimodal grain size distributions in UFG materials produced b… (10.4149/km_2011_1_51) | Abstract References ORCID License | 107.92 | 11 |
| 32 | Creep behavior of metals processed by equal-channel angular… (10.4149/km_2011_1_75) | Abstract References ORCID License | 107.92 | 11 |
| 33 | Comparison of mechanical and microstructural behaviors of tu… (10.4149/km_2011_2_155) | Abstract References ORCID License | 107.92 | 11 |
| 34 | Effects of lubricant and temperature on friction coefficient… (10.4149/km_2011_5_375) | Abstract References ORCID License | 107.92 | 11 |
| 35 | Sliding wear performances of 316 L, Ti6Al4V, and CoCrMo allo… (10.4149/km_2013_3_183) | Abstract References ORCID License | 107.92 | 11 |
| 36 | Influence of weld overlaying methods on microstructure and c… (10.4149/km_2014_3_141) | Abstract References ORCID License | 107.92 | 11 |
| 37 | Investigating the effect of deep cryogenic heat treatment on… (10.4149/km_2014_3_163) | Abstract References ORCID License | 107.92 | 11 |
| 38 | High-temperature low-cycle fatigue behaviour of HIP treated… (10.4149/km_2016_6_471) | Abstract References ORCID License | 107.92 | 11 |
| 39 | The effect of friction stir welding parameters on microstruc… (10.4149/km_2017_2_107) | Abstract References ORCID License | 107.92 | 11 |
| 40 | Investigation of microstructure and mechanical properties of… (10.4149/km_2018_2_121) | Abstract References ORCID License | 107.92 | 11 |
| 41 | WE43 magnesium alloy – material for challenging applications (10.4149/km_2019_3_159) | Abstract References ORCID License | 107.92 | 11 |
| 42 | Microstructure and compressive properties of aluminum matrix… (10.4149/km_2020_6_395) | Abstract References ORCID License | 107.92 | 11 |
| 43 | A study on wear and machinability of AZ series (AZ01-AZ91) c… (10.4149/km_2014_5_255) | Abstract References ORCID License | 104.14 | 10 |
| 44 | Experimental research and ANN modeling on the impact of the… (10.4149/km_2019_1_61) | Abstract References ORCID License | 104.14 | 10 |
| 45 | Metallurgical characterization of natural aging effects on p… (10.31577/km.2022.4.209) | Abstract References ORCID License | 100.00 | 9 |
| 46 | High temperature plastic deformation of CuZn30 brass - calcu… (10.4149/km_2010_1_41) | Abstract References ORCID License | 100.00 | 9 |
| 47 | Mechanical properties of particle reinforced titanium and ti… (10.4149/km_2010_2_87) | Abstract References ORCID License | 100.00 | 9 |
| 48 | The effect of homogenization on microstructure and hot ducti… (10.4149/km_2010_5_277) | Abstract References ORCID License | 100.00 | 9 |
| 49 | Nature of phases in boronized H11 hot work tool steel (10.4149/km_2012_3_177) | Abstract References ORCID License | 100.00 | 9 |
| 50 | Mechanical and structural evaluation of friction stir welded… (10.4149/km_2016_5_351) | Abstract References ORCID License | 100.00 | 9 |