| 1 | ASSESSMENT OF WORKING CONDITIONS IN FOUNDRIES WITH THE MASS… (10.21122/1683-6065-2017-4-134-137) | References ORCID License | 78.10 | 10 |
| 2 | Classification of production factors of foundry production (10.21122/1683-6065-2021-3-118-122) | References ORCID | 63.94 | 18 |
| 3 | BORON. PROPERTIES AND APPLICATION IN NUCLEAR ENERGY (10.21122/1683-6065-2017-3-91-94) | ORCID License | 38.91 | 5 |
| 4 | Nanostructural theory of metal melts. Foundry production and… (10.21122/1683-6065-2020-3-7-9) | ORCID | 37.96 | 32 |
| 5 | COMPREHENSIVE INDEX OF QUALITY OF ROLLED STEEL AND ITS APPLI… (10.21122/1683-6065-2017-1-97-102) | ORCID License | 34.95 | 4 |
| 6 | EVALUATION OF METALLIC MATERIALS PLASTICITY BY DYNAMIC INDEN… (10.21122/1683-6065-2017-2-81-87) | ORCID License | 34.95 | 4 |
| 7 | ECONOMY, ECOLOGY, ORGANIZATION OF FOUNDRY PRODUCTION BY LOST… (10.21122/1683-6065-2017-4-53-59) | ORCID License | 34.95 | 4 |
| 8 | Nanostructured crystallization of casting alloys (10.21122/1683-6065-2022-3-13-19) | ORCID | 31.97 | 18 |
| 9 | Nanostructural crystallization of metals (10.21122/1683-6065-2021-2-23-26) | ORCID | 31.38 | 17 |
| 10 | OPTICAL EFFECTS AT NONMETALLIC MATERIALS MICROSCOPY (10.21122/1683-6065-2017-1-110-114) | ORCID License | 30.10 | 3 |
| 11 | INFLUENCE OF THE MACROSTRUCTURE ON SEGREGATION OF THE STEEL… (10.21122/1683-6065-2017-1-45-49) | ORCID License | 30.10 | 3 |
| 12 | DETERMINATION OF THE OPTIMAL SPEED OF THE MANDREL IN THE CON… (10.21122/1683-6065-2017-1-86-92) | ORCID License | 30.10 | 3 |
| 13 | PHYSICO-CHEMICAL INTERACTIONS BETWEEN COMPONENTS OF THE Al/S… (10.21122/1683-6065-2017-2-31-39) | ORCID License | 30.10 | 3 |
| 14 | STRUCTURE AND HARDNESS OF CASTINGS MADE FROM WEAR-RESISTANT… (10.21122/1683-6065-2017-3-39-44) | ORCID License | 30.10 | 3 |
| 15 | WASTELESS TECHNOLOGY OF PROCESSING OF ALUMINUM CHIPS AND SLA… (10.21122/1683-6065-2017-4-109-118) | ORCID License | 30.10 | 3 |
| 16 | LUBRICANTS FOR THE MANUFACTURE OF SAND-SMOOTHED RODS BY HYDR… (10.21122/1683-6065-2018-1-69-74) | ORCID License | 30.10 | 3 |
| 17 | WASHING UP OF SEPARATE COATINGS IN MANUFACTURING CASES FROM… (10.21122/1683-6065-2018-1-78-83) | ORCID License | 30.10 | 3 |
| 18 | THE PROBLEM OF MODIFYING AN ALUMINUM-SILICON EUTECTIC ALLOY… (10.21122/1683-6065-2018-2-12-15) | ORCID License | 30.10 | 3 |
| 19 | A study of working conditions in the shops of non-ferrous ca… (10.21122/1683-6065-2020-1-122-124) | References ORCID | 30.10 | 3 |
| 20 | Performance quality analysis of brake iron and composite pad… (10.21122/1683-6065-2021-1-27-37) | ORCID | 30.10 | 15 |
| 21 | Working conditions of the core workers workplaces (10.21122/1683-6065-2022-1-135-137) | Abstract ORCID | 30.10 | 3 |
| 22 | The usage of organic solvents in paint systems used in high-… (10.21122/1683-6065-2022-1-96-105) | References ORCID | 30.10 | 3 |
| 23 | Research of the working conditions noise factor in the found… (10.21122/1683-6065-2022-2-130-136) | ORCID | 28.65 | 13 |
| 24 | Research of the thermal factor of working conditions in the… (10.21122/1683-6065-2022-2-123-129) | ORCID | 27.85 | 12 |
| 25 | The method of comprehensive assessment of working conditions… (10.21122/1683-6065-2021-3-112-117) | ORCID | 25.00 | 9 |
| 26 | THE EFFECT OF PREPARATION CONDITIONS OF RAPIDLY SOLIDIFIED I… (10.21122/1683-6065-2017-1-136-142) | ORCID License | 23.86 | 2 |
| 27 | MANUFACTURE AND USE OF SILUMIN WITH GLOBULAR SILICON (10.21122/1683-6065-2017-2-15-19) | ORCID License | 23.86 | 2 |
| 28 | CORROSION RESISTANCE OF DYNAMIC LOADED CAST ALLOY AS12 (10.21122/1683-6065-2017-2-70-75) | ORCID License | 23.86 | 2 |
| 29 | SPECIAL FEATURES OF MAGNETIC PULSE HARDENING PROCESSING OF S… (10.21122/1683-6065-2017-2-88-96) | ORCID License | 23.86 | 2 |
| 30 | OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT… (10.21122/1683-6065-2017-3-70-77) | ORCID License | 23.86 | 2 |
| 31 | OPTICAL EFFECTS AT METALLIC AND NONMETALLIC MATERIALS MICROS… (10.21122/1683-6065-2017-4-119-125) | ORCID License | 23.86 | 2 |
| 32 | EXPERIENCE IN USE OF RECUPERATIVE BURNERS DEVICES IN FURNACE… (10.21122/1683-6065-2017-4-32-36) | ORCID License | 23.86 | 2 |
| 33 | RECYCLING OF FERROUS METAL SHAVINGS (10.21122/1683-6065-2017-4-94-101) | ORCID License | 23.86 | 2 |
| 34 | IMPROVEMENT OF EFFICIENCY OF USE OF LIQUID-GLASS MIXTURES. O… (10.21122/1683-6065-2018-1-47-54) | ORCID License | 23.86 | 2 |
| 35 | RESEARCH OF THE TRIBOLOGICAL PROPERTIES OF CAST SILUMIN АК15… (10.21122/1683-6065-2018-1-7-11) | ORCID License | 23.86 | 2 |
| 36 | COLD MIXTURE OF INORGANIC BINDER: STATUS AND PROSPECTS OF DE… (10.21122/1683-6065-2018-2-16-22) | ORCID License | 23.86 | 2 |
| 37 | FOUNDRY PRODUCTION AS AN ENVIRONMENT FOR NATURE-LIKE TECHNOL… (10.21122/1683-6065-2018-2-23-28) | ORCID License | 23.86 | 2 |
| 38 | OBTAINING A CATHODE TARGET OF SILICIDES FOR VACUUM ION-PLASM… (10.21122/1683-6065-2018-2-99-102) | ORCID License | 23.86 | 2 |
| 39 | Increasing the strength of grey cast iron by introducing of… (10.21122/1683-6065-2018-3-43-49) | Abstract ORCID | 23.86 | 2 |
| 40 | Feasibility and design study of investment projects in metal… (10.21122/1683-6065-2020-2-29-35) | References ORCID | 23.86 | 2 |
| 41 | General problems of development and implementation of nanoma… (10.21122/1683-6065-2020-4-152-162) | ORCID | 23.86 | 8 |
| 42 | Import‑ substituting equipment for the lost form casting pro… (10.21122/1683-6065-2021-2-27-31) | Abstract ORCID | 23.86 | 2 |
| 43 | VIBRATION DIAGNOSTICS AND VIBRATION ALIGNMENT – EFFECTIVE TO… (10.21122/1683-6065-2017-1-76-79) | References ORCID License | 22.58 | 1 |
| 44 | RECYCLING OF SCRAP AND WASTE OF COPPER AND COPPER ALLOYS IN… (10.21122/1683-6065-2017-2-128-130) | References ORCID License | 22.58 | 1 |
| 45 | STATUS AND PROSPECTS OF DEVELOPMENT OF METALLURGICAL PRODUCT… (10.21122/1683-6065-2017-4-10-15) | References ORCID License | 22.58 | 1 |
| 46 | WIRE BREAKAGE DURING WIRE DRAWING DUE TO THE PRESENCE OF SUR… (10.21122/1683-6065-2017-4-26-31) | References ORCID License | 22.58 | 1 |
| 47 | THE USE OF ENERGY EFFICIENT TECHNOLOGIES IN THE FRAMEWORK OF… (10.21122/1683-6065-2018-1-90-95) | References ORCID License | 22.58 | 1 |
| 48 | Thermodynamic metal crystallization basics (10.21122/1683-6065-2020-2-8-11) | ORCID | 22.58 | 7 |
| 49 | Analysis of the prospects of the application of the electro… (10.21122/1683-6065-2020-4-125-130) | ORCID | 22.58 | 7 |
| 50 | Application of 3D-printing extrusion technology in foundry p… (10.21122/1683-6065-2018-4-139-144) | ORCID | 21.13 | 6 |
| 51 | Research of influence of working conditions on the general i… (10.21122/1683-6065-2019-3-156-159) | ORCID | 21.13 | 6 |
| 52 | Thermodynamic metal melting bases. Foundry production and me… (10.21122/1683-6065-2020-1-14-17) | ORCID | 21.13 | 6 |
| 53 | Structure of metal melt (10.21122/1683-6065-2020-1-18-20) | ORCID | 21.13 | 6 |
| 54 | Study of working conditions by dust factor in foundries with… (10.21122/1683-6065-2023-1-135-137) | ORCID | 21.13 | 6 |
| 55 | Research of influence of working conditions on workers in fo… (10.21122/1683-6065-2019-2-134-137) | ORCID | 19.45 | 5 |
| 56 | A study of working conditions in foundries when performing w… (10.21122/1683-6065-2019-3-163-165) | ORCID | 19.45 | 5 |
| 57 | Status analysis of the foundries in the Republic of Belarus (10.21122/1683-6065-2019-3-35-40) | ORCID | 19.45 | 5 |
| 58 | Quantitative methods for assessing the microstructure of ste… (10.21122/1683-6065-2021-2-42-48) | ORCID | 19.45 | 5 |
| 59 | Working conditions of the metal fillers workplaces (10.21122/1683-6065-2022-1-130-134) | ORCID | 19.45 | 5 |
| 60 | Features of cast iron for railway brake pads (10.21122/1683-6065-2022-1-43-48) | ORCID | 19.45 | 5 |
| 61 | The effect of ion‑plasma nitriding on the enduring quality a… (10.21122/1683-6065-2022-2-78-83) | ORCID | 19.45 | 5 |
| 62 | Working conditions in foundries (10.21122/1683-6065-2018-4-160-164) | ORCID | 17.47 | 4 |
| 63 | Improvement of efficiency of use of liquid-glass mixtures. P… (10.21122/1683-6065-2018-4-38-44) | ORCID | 17.47 | 4 |
| 64 | The return of the dispersed metal waste into production (10.21122/1683-6065-2019-1-45-48) | ORCID | 17.47 | 4 |
| 65 | A study of the air quality of working areas in foundries (10.21122/1683-6065-2019-2-138-132) | ORCID | 17.47 | 4 |
| 66 | Evaluation of plasticity during deformation of carbon steel (10.21122/1683-6065-2019-3-85-88) | ORCID | 17.47 | 4 |
| 67 | About brownian movement in liquids (10.21122/1683-6065-2020-4-75-77) | ORCID | 17.47 | 4 |
| 68 | Investigation of the processes of dust processing gas cleani… (10.21122/1683-6065-2021-1-106-113) | ORCID | 17.47 | 4 |
| 69 | Improving the wear resistance of steel products by using non… (10.21122/1683-6065-2021-2-100-104) | ORCID | 17.47 | 4 |
| 70 | Recycling of stainless steel bar scrap by radial-shear rolli… (10.21122/1683-6065-2021-2-61-67) | ORCID | 17.47 | 4 |
| 71 | Analysis of methods for obtaining zinc-containing coatings u… (10.21122/1683-6065-2021-2-87-93) | ORCID | 17.47 | 4 |
| 72 | Improvement of the technological process of manufacturing be… (10.21122/1683-6065-2021-3-65-73) | ORCID | 17.47 | 4 |
| 73 | The integrated working conditions and labor safety assessmen… (10.21122/1683-6065-2021-4-116-122) | ORCID | 17.47 | 4 |
| 74 | Theoretical and technological aspects of production mechani‑… (10.21122/1683-6065-2021-4-90-105) | ORCID | 17.47 | 4 |
| 75 | Providing the necessary type of metal microstructure of tita… (10.21122/1683-6065-2022-1-106-112) | ORCID | 17.47 | 4 |
| 76 | Current state of metal melt crystallization theory. Foundry… (10.21122/1683-6065-2022-1-19-24) | ORCID | 17.47 | 4 |
| 77 | On carbon distribution in austenite Fe‑C alloys (10.21122/1683-6065-2022-2-23-25) | ORCID | 17.47 | 4 |
| 78 | Influence of the method of aerodynamic sound hardening on th… (10.21122/1683-6065-2023-1-146-147) | ORCID | 17.47 | 4 |
| 79 | Formation of plastic properties during deformation stretchin… (10.21122/1683-6065-2023-2-61-63) | ORCID | 17.47 | 4 |
| 80 | MODIFYING OF CAST IRON WITH ULTRADISPERSE ADDITIVES (10.21122/1683-6065-2017-1-11-15) | ORCID License | 15.05 | 1 |
| 81 | DEVELOPMENT OF HEAT-INSULATING COATINGS FOR DIE MOULD OF LOW… (10.21122/1683-6065-2017-1-26-29) | ORCID License | 15.05 | 1 |
| 82 | PARAMETERIZATION OF MICROSTRUCTURES IMAGES OF SPHEROIDAL GRA… (10.21122/1683-6065-2017-1-50-56) | ORCID License | 15.05 | 1 |
| 83 | SIMULATIONS OF DISTRIBUTIONS OF SHRINKAGE DEFECTS IN THE CAS… (10.21122/1683-6065-2017-1-59-68) | ORCID License | 15.05 | 1 |
| 84 | EFFECTS OF AUSTENITIZATION ON STRUCTURE FORMATION СHROMO-MOL… (10.21122/1683-6065-2017-1-69-72) | ORCID License | 15.05 | 1 |
| 85 | THE MOVEMENT AND MIXING OF DISPERSED MATERIALS IN ROTARY FUR… (10.21122/1683-6065-2017-2-117-127) | ORCID License | 15.05 | 1 |
| 86 | VERTICAL CENTRIFUGAL CASTING OF A HYPEREUTECTIC SILUMIN WITH… (10.21122/1683-6065-2017-2-5-11) | ORCID License | 15.05 | 1 |
| 87 | THE FACTORS INFLUENCING QUALITY OF STRUCTURE OF WORKPIECES P… (10.21122/1683-6065-2017-2-58-64) | ORCID License | 15.05 | 1 |
| 88 | THE IMPACT OF AUSTENITIZATION TEMPERATURE ON A STRUCTURES FO… (10.21122/1683-6065-2017-3-13-16) | ORCID License | 15.05 | 1 |
| 89 | ENERGY SAVING HEATING UNITS OF NEW GENERATION (10.21122/1683-6065-2017-3-34-38) | ORCID License | 15.05 | 1 |
| 90 | OPTIMIZATION OF DESULFURIZATION OF METALL IN CONVERTER SHOP… (10.21122/1683-6065-2017-3-5-10) | ORCID License | 15.05 | 1 |
| 91 | PROCUREMENT OF FERROTITIAN FROM METAL INDUSTRY WASTE BY METH… (10.21122/1683-6065-2017-3-64-69) | ORCID License | 15.05 | 1 |
| 92 | ERBIUM AND ITS APPLICATION IN MODERN TECHNOLOGY (10.21122/1683-6065-2017-3-95-96) | ORCID License | 15.05 | 1 |
| 93 | MANAGEMENT OF THE SLAG AJUSTMENT IN ARC FURNACES (10.21122/1683-6065-2017-4-48-52) | ORCID License | 15.05 | 1 |
| 94 | REGULATING OF CAST CONSTRUCTIONS PROPERTIES BY INTENSIFYING… (10.21122/1683-6065-2017-4-60-67) | ORCID License | 15.05 | 1 |
| 95 | NANOSTRUCTURIZATION IN FOUNDRY PROCESSES (10.21122/1683-6065-2017-4-68-71) | ORCID License | 15.05 | 1 |
| 96 | APPLICATION EXPERIENCE OF COMPUTER SIMULATION SYSTEMS TO INC… (10.21122/1683-6065-2017-4-72-76) | ORCID License | 15.05 | 1 |
| 97 | EXTRA-FURNACE STEEL PROCESSING BY RECYCLED SECONDARY ALUMINU… (10.21122/1683-6065-2018-1-100-105) | ORCID License | 15.05 | 1 |
| 98 | METHODS OF INCREASING THE PLASTIC PROPERTIES OF COLD-WORKED… (10.21122/1683-6065-2018-1-110-112) | ORCID License | 15.05 | 1 |
| 99 | FEATURES OF MANUFACTURE OF COMPOSITE MATERIAL WITH MACROHETE… (10.21122/1683-6065-2018-1-124-127) | ORCID License | 15.05 | 1 |
| 100 | ACHIEVEMENT OF DIMENSIONAL ACCURACY OF LENGTH VARIABLE THICK… (10.21122/1683-6065-2018-1-128-131) | ORCID License | 15.05 | 1 |
| 101 | THE PRODUCTION TECHNOLOGICAL PROCESSES OF STEEL CAST PRODUCT… (10.21122/1683-6065-2018-1-22-27) | ORCID License | 15.05 | 1 |
| 102 | INFLUENCE OF THE CAST IRON’S CHEMICAL COMPOSITION ON THE CON… (10.21122/1683-6065-2018-1-34-40) | ORCID License | 15.05 | 1 |
| 103 | DIAGNOSTICS OF DENDRITE STRUCTURE OF MULTICOMPONENT ALUMINUM… (10.21122/1683-6065-2018-1-55-62) | ORCID License | 15.05 | 1 |
| 104 | STUDY OF THE EFFECT OF MODIFIERS WITH ULTRADISPERSED PARTICL… (10.21122/1683-6065-2018-2-108-112) | ORCID License | 15.05 | 1 |
| 105 | CREATION OF OWN RAW-MATERIAL BASE FOR FOUNDRY PRODUCTION ON… (10.21122/1683-6065-2018-2-29-36) | ORCID License | 15.05 | 1 |
| 106 | Modern Methods of Creating Casting Model Kits (10.21122/1683-6065-2018-3-125-130) | ORCID | 15.05 | 3 |
| 107 | Labour safety in foundry production (10.21122/1683-6065-2018-3-148-152) | ORCID | 15.05 | 3 |
| 108 | Heat transfer in the mold during vertical continuous casting… (10.21122/1683-6065-2018-3-26-30) | ORCID | 15.05 | 3 |
| 109 | Materials and Developments Heinrich Wagner Sinto Maschinenfa… (10.21122/1683-6065-2019-1-18-20) | References ORCID | 15.05 | 1 |
| 110 | Development of actions on optimization of chemical compositi… (10.21122/1683-6065-2019-1-49-56) | ORCID | 15.05 | 3 |
| 111 | Modern metallography – the basis of foundry material science (10.21122/1683-6065-2019-2-99-108) | ORCID | 15.05 | 3 |
| 112 | Changer in the texture orientation of electrolytic nickel by… (10.21122/1683-6065-2019-4-107-114) | ORCID | 15.05 | 3 |
| 113 | Research on the extent of environmental pollution by foundry… (10.21122/1683-6065-2020-1-129-132) | References ORCID | 15.05 | 1 |
| 114 | Modification of surface layers of metal parts by pulse laser… (10.21122/1683-6065-2020-1-99-109) | ORCID | 15.05 | 3 |
| 115 | Artifacts in metallography: dust. (10.21122/1683-6065-2020-3-93-98) | ORCID | 15.05 | 3 |
| 116 | Study of structure features and properties of thermodifusion… (10.21122/1683-6065-2021-1-124-129) | Abstract ORCID | 15.05 | 1 |
| 117 | Investigation of granulometric, chemical and phase compositi… (10.21122/1683-6065-2021-3-106-111) | ORCID | 15.05 | 3 |
| 118 | Controlling the drawability of carbon steel wire rod (10.21122/1683-6065-2021-3-61-64) | ORCID | 15.05 | 3 |
| 119 | Thermodynamics of solid and liquid aluminium (10.21122/1683-6065-2021-3-74-77) | ORCID | 15.05 | 3 |
| 120 | Calculation of thermodynamic parameters of metals (10.21122/1683-6065-2021-4-12-15) | Abstract ORCID | 15.05 | 1 |
| 121 | Calculation of parameters of elementary nanocrystals of liqu… (10.21122/1683-6065-2021-4-16-18) | ORCID | 15.05 | 3 |
| 122 | Working conditions of the formers workplaces (10.21122/1683-6065-2022-1-138-141) | ORCID | 15.05 | 3 |
| 123 | Gating systems in the casting grinding balls technology (10.21122/1683-6065-2022-1-32-36) | References ORCID | 15.05 | 1 |
| 124 | High chrome cast iron for mineral processing and conveying e… (10.21122/1683-6065-2022-1-73-77) | Abstract ORCID | 15.05 | 1 |
| 125 | Nanostructured steel crystallization (10.21122/1683-6065-2022-2-31-33) | ORCID | 15.05 | 3 |
| 126 | Modeling of the process of heating of chip‑powder dispersion… (10.21122/1683-6065-2022-2-59-67) | ORCID | 15.05 | 3 |
| 127 | Artifacts in metallography: threads and fibers (10.21122/1683-6065-2022-2-91-96) | ORCID | 15.05 | 3 |
| 128 | Development of basic requirements for an automated heat trea… (10.21122/1683-6065-2022-2-97-103) | ORCID | 15.05 | 3 |
| 129 | Investigation of the air environment of the working areas of… (10.21122/1683-6065-2022-3-122-126) | ORCID | 15.05 | 3 |
| 130 | Control of deformability during drawing of low‑carbon wire r… (10.21122/1683-6065-2022-3-61-63) | ORCID | 15.05 | 3 |
| 131 | About the activities of the board of the SPC of OJSC “BSW” –… (10.21122/1683-6065-2022-4-139-143) | References ORCID | 15.05 | 1 |
| 132 | On deoxidation and modification of carbon steel (10.21122/1683-6065-2022-4-24-28) | ORCID | 15.05 | 3 |
| 133 | Philosophical aspect of the basis of the theory aerodynamic… (10.21122/1683-6065-2023-1-148-148) | ORCID | 15.05 | 3 |
| 134 | On the solubility of gases in liquid casting alloys (10.21122/1683-6065-2023-1-32-34) | ORCID | 15.05 | 3 |
| 135 | The impact of factors of the production environment on worke… (10.21122/1683-6065-2023-2-129-135) | ORCID | 15.05 | 3 |
| 136 | Technical potential of the SAP HANA platform (10.21122/1683-6065-2023-2-64-69) | References ORCID | 15.05 | 1 |
| 137 | Calculation of steel ingot heating parameters in the seconda… (10.21122/1683-6065-2025-4-40-43) | Abstract ORCID | 15.05 | 1 |
| 138 | Modes of hardening of a high-strength (α+β)-titanium alloy V… (10.21122/1683-6065-2018-3-141-147) | ORCID | 11.93 | 2 |
| 139 | Development of methodology of experimental studies of contro… (10.21122/1683-6065-2018-3-36-42) | ORCID | 11.93 | 2 |
| 140 | Influence of heat cycling conditions in the additive manufac… (10.21122/1683-6065-2018-4-133-138) | ORCID | 11.93 | 2 |
| 141 | Hydrogen technologies in foundry and metallurgy: current sta… (10.21122/1683-6065-2018-4-145-154) | ORCID | 11.93 | 2 |
| 142 | Influence of deoxidizing powder on the internal surface of h… (10.21122/1683-6065-2019-1-61-65) | ORCID | 11.93 | 2 |
| 143 | Scientific problem of metal melts. Solutions (10.21122/1683-6065-2019-2-9-12) | ORCID | 11.93 | 2 |
| 144 | The perspective of application of carburized steels, manufac… (10.21122/1683-6065-2019-3-147-152) | ORCID | 11.93 | 2 |
| 145 | Eco-friendly liquid-glass binder modified by ultradispersed… (10.21122/1683-6065-2019-3-41-45) | ORCID | 11.93 | 2 |
| 146 | Research of heat-exchange processes in a casting form with r… (10.21122/1683-6065-2019-3-54-59) | ORCID | 11.93 | 2 |
| 147 | The possibility of using high-quality fused magnesia in the… (10.21122/1683-6065-2019-3-60-64) | ORCID | 11.93 | 2 |
| 148 | Special theory of relativity: a view of an external observer (10.21122/1683-6065-2019-4-26-30) | ORCID | 11.93 | 2 |
| 149 | Ways to improve the efficiency of Foundries of The Republic… (10.21122/1683-6065-2019-4-81-89) | ORCID | 11.93 | 2 |
| 150 | Effect of gases released during solidification of castings o… (10.21122/1683-6065-2020-2-12-14) | ORCID | 11.93 | 2 |
| 151 | Technological pecularities of producing cast iron with spher… (10.21122/1683-6065-2020-2-15-21) | ORCID | 11.93 | 2 |
| 152 | Particularities of metallographic preparation for the analys… (10.21122/1683-6065-2020-2-59-62) | ORCID | 11.93 | 2 |
| 153 | Some particularities of microscopic investigation of non-met… (10.21122/1683-6065-2020-2-75-80) | ORCID | 11.93 | 2 |
| 154 | Forces of space (10.21122/1683-6065-2020-3-117-120) | ORCID | 11.93 | 2 |
| 155 | Plasma coatings made of mechanically synthesized composite p… (10.21122/1683-6065-2020-3-84-92) | ORCID | 11.93 | 2 |
| 156 | High-temperature aluminum composite materials with special p… (10.21122/1683-6065-2020-3-99-111) | ORCID | 11.93 | 2 |
| 157 | Analysis of corrosive properties of zinc-containing coatings… (10.21122/1683-6065-2020-4-106-112) | ORCID | 11.93 | 2 |
| 158 | On dark matter and dark energy (10.21122/1683-6065-2020-4-166-168) | ORCID | 11.93 | 2 |
| 159 | Study of working conditions in aluminum casting shops worksi… (10.21122/1683-6065-2021-1-149-154) | ORCID | 11.93 | 2 |
| 160 | Technologies of refining of aluminum alloys by gas blowing (10.21122/1683-6065-2021-1-38-42) | ORCID | 11.93 | 2 |
| 161 | Application of statistical methods in the analysis of noncon… (10.21122/1683-6065-2021-3-40-45) | ORCID | 11.93 | 2 |
| 162 | Using of aluminium slags and products of their pro‑cessing i… (10.21122/1683-6065-2021-4-42-49) | ORCID | 11.93 | 2 |
| 163 | Analysis of the composition and processing technologies of d… (10.21122/1683-6065-2021-4-66-69) | ORCID | 11.93 | 2 |
| 164 | Automatic analysis of nonmetallic inclusions in steel using… (10.21122/1683-6065-2022-1-64-69) | ORCID | 11.93 | 2 |
| 165 | Modification of the materials of the welded zone in the ultr… (10.21122/1683-6065-2022-2-111-117) | ORCID | 11.93 | 2 |
| 166 | Application of cast parts in mechanical engineering (10.21122/1683-6065-2022-2-18-22) | ORCID | 11.93 | 2 |
| 167 | Shrinkage phenomena in silumins when treated with long‑actin… (10.21122/1683-6065-2022-3-30-35) | ORCID | 11.93 | 2 |
| 168 | Dissolution of hydrogen in metals and casting alloys (10.21122/1683-6065-2022-3-53-57) | ORCID | 11.93 | 2 |
| 169 | Modeling of the process of heating of chip‑powder dispersion… (10.21122/1683-6065-2022-3-70-82) | ORCID | 11.93 | 2 |
| 170 | Concept for development of economically alloyed ausferritic… (10.21122/1683-6065-2022-4-29-37) | ORCID | 11.93 | 2 |
| 171 | On modification of silumins (10.21122/1683-6065-2022-4-41-46) | ORCID | 11.93 | 2 |
| 172 | Localization of plastic deformation during deformation of lo… (10.21122/1683-6065-2022-4-51-54) | ORCID | 11.93 | 2 |
| 173 | Processes of salt slag recycling in aluminum production to o… (10.21122/1683-6065-2022-4-88-96) | ORCID | 11.93 | 2 |
| 174 | Artifacts in metallography: etching pits (10.21122/1683-6065-2023-1-112-117) | ORCID | 11.93 | 2 |
| 175 | Kazakhstan Study of the influence of large shear deformation… (10.21122/1683-6065-2023-1-128-134) | ORCID | 11.93 | 2 |
| 176 | Working conditions at workplaces in finishing operations dep… (10.21122/1683-6065-2023-1-138-142) | ORCID | 11.93 | 2 |
| 177 | Research and processing of shot blasting dust (10.21122/1683-6065-2023-1-73-78) | ORCID | 11.93 | 2 |
| 178 | The main directions of national metallurgy development in th… (10.21122/1683-6065-2023-2-31-44) | ORCID | 11.93 | 2 |
| 179 | About the theory of relativity (10.21122/1683-6065-2023-3-112-115) | ORCID | 11.93 | 2 |
| 180 | Investigation of the structure of heat-resistant alloys unde… (10.21122/1683-6065-2023-3-16-23) | ORCID | 11.93 | 2 |
| 181 | The influence of structure dispersity on the intensity of ha… (10.21122/1683-6065-2024-3-35-36) | ORCID | 11.93 | 2 |
| 182 | Gradient material Pd-PdHx (10.21122/1683-6065-2018-3-110-117) | ORCID | 7.53 | 1 |
| 183 | Improvement of efficiency of use of liquid-glass mixtures Pa… (10.21122/1683-6065-2018-3-31-35) | ORCID | 7.53 | 1 |
| 184 | The sharpness of the images in metallography (10.21122/1683-6065-2018-3-76-81) | ORCID | 7.53 | 1 |
| 185 | Influence of parameters of impulse laser impact on the forma… (10.21122/1683-6065-2018-3-88-94) | ORCID | 7.53 | 1 |
| 186 | The performance properties of chromium cast irons with diffe… (10.21122/1683-6065-2018-4-50-54) | ORCID | 7.53 | 1 |
| 187 | Scientific support of modernization of the Holding «Belarusi… (10.21122/1683-6065-2019-1-11-17) | ORCID | 7.53 | 1 |
| 188 | The stability of the internal cavities of steel casting (10.21122/1683-6065-2019-1-24-27) | ORCID | 7.53 | 1 |
| 189 | Research of the influence of highcarbon steel wire drawing s… (10.21122/1683-6065-2019-1-73-77) | ORCID | 7.53 | 1 |
| 190 | The measurement of the vertical relief on metal-graphic micr… (10.21122/1683-6065-2019-2-117-121) | ORCID | 7.53 | 1 |
| 191 | Technological aspects of creation of composite wear-resistan… (10.21122/1683-6065-2019-2-122-128) | ORCID | 7.53 | 1 |
| 192 | A study of the influence of working conditions on indicators… (10.21122/1683-6065-2019-2-129-133) | ORCID | 7.53 | 1 |
| 193 | Influence of the modes of shaping of sand-resin shellis on q… (10.21122/1683-6065-2019-2-13-18) | ORCID | 7.53 | 1 |
| 194 | Technological problems of modifying of structure of silumin… (10.21122/1683-6065-2019-2-19-22) | ORCID | 7.53 | 1 |
| 195 | Scientific problem of modifying of primary crystals a -phas… (10.21122/1683-6065-2019-2-28-31) | ORCID | 7.53 | 1 |
| 196 | Method of providing wear-resistance of the blades of paddle… (10.21122/1683-6065-2019-2-32-35) | ORCID | 7.53 | 1 |
| 197 | Analysis of the development of consumption and production of… (10.21122/1683-6065-2019-2-48-59) | ORCID | 7.53 | 1 |
| 198 | The phase composition, structure and properties of high-temp… (10.21122/1683-6065-2019-3-133-141) | ORCID | 7.53 | 1 |
| 199 | Assessment of the possibility to use the of hot dip galvaniz… (10.21122/1683-6065-2019-3-153-155) | ORCID | 7.53 | 1 |
| 200 | A study of working conditions in electroplating shops (10.21122/1683-6065-2019-3-160-162) | ORCID | 7.53 | 1 |
| 201 | Advanced materials used for development of lubricated compos… (10.21122/1683-6065-2019-3-70-73) | ORCID | 7.53 | 1 |
| 202 | Development and implementation of an automated system of opt… (10.21122/1683-6065-2019-4-38-42) | ORCID | 7.53 | 1 |
| 203 | The use of nanotechnology in the manufacture of castings (10.21122/1683-6065-2019-4-94-99) | ORCID | 7.53 | 1 |
| 204 | Structure and characteristics of boron-containing steels for… (10.21122/1683-6065-2020-1-25-30) | ORCID | 7.53 | 1 |
| 205 | Development and application of standard enterprise samples i… (10.21122/1683-6065-2020-1-34-37) | ORCID | 7.53 | 1 |
| 206 | Methods for producing permanent joints of aluminum and titan… (10.21122/1683-6065-2020-1-56-64) | ORCID | 7.53 | 1 |
| 207 | Surface morphology, magnetic resonant and antistatic propert… (10.21122/1683-6065-2020-1-87-92) | ORCID | 7.53 | 1 |
| 208 | Application of rotary furnaces for melting ferrous alloys (10.21122/1683-6065-2020-1-9-13) | ORCID | 7.53 | 1 |
| 209 | The experience of using calcium carbide for the deoxidation… (10.21122/1683-6065-2020-2-53-58) | ORCID | 7.53 | 1 |
| 210 | . Increasing the efficiency of casting manufacture in small-… (10.21122/1683-6065-2020-3-10-14) | ORCID | 7.53 | 1 |
| 211 | Analysis of modern composite materials used in the manufactu… (10.21122/1683-6065-2020-3-15-22) | ORCID | 7.53 | 1 |
| 212 | Estimation of quality of hot pressed briquettes as a type of… (10.21122/1683-6065-2020-3-48-55) | ORCID | 7.53 | 1 |
| 213 | Creation and research of antistatic carbon coatings on fabri… (10.21122/1683-6065-2020-4-113-117) | ORCID | 7.53 | 1 |
| 214 | Influence of sherardizing on working properties of metal par… (10.21122/1683-6065-2020-4-131-138) | ORCID | 7.53 | 1 |
| 215 | Increase in the heat resistance of carbon steels by thermodi… (10.21122/1683-6065-2020-4-139-147) | ORCID | 7.53 | 1 |
| 216 | Trends in the use of bentonite clays (10.21122/1683-6065-2020-4-78-89) | ORCID | 7.53 | 1 |
| 217 | Equipment and technologies for the production and use of nan… (10.21122/1683-6065-2021-1-137-141) | ORCID | 7.53 | 1 |
| 218 | Analysis of the microstructure of wear resistant chrome cast… (10.21122/1683-6065-2021-1-142-148) | ORCID | 7.53 | 1 |
| 219 | The results of the tasks of the subprogram “Мetallurgy» obta… (10.21122/1683-6065-2021-1-155-165) | ORCID | 7.53 | 1 |
| 220 | Modern technology of investment casting for the production o… (10.21122/1683-6065-2021-1-49-52) | ORCID | 7.53 | 1 |
| 221 | Method of physical simulation of macro processes of solidifi… (10.21122/1683-6065-2021-1-53-55) | ORCID | 7.53 | 1 |
| 222 | Effect of micro alloying of steel with niobium on the mechan… (10.21122/1683-6065-2021-1-73-77) | ORCID | 7.53 | 1 |
| 223 | Production of target cathodes from composite silicides for a… (10.21122/1683-6065-2021-2-68-75) | ORCID | 7.53 | 1 |
| 224 | Preparation of silicon and aluminum nanoparticles in an aque… (10.21122/1683-6065-2021-2-76-80) | ORCID | 7.53 | 1 |
| 225 | Fabrication and structural characterization of Fe‑Al‑based l… (10.21122/1683-6065-2021-3-97-105) | ORCID | 7.53 | 1 |
| 226 | Nanostructural mechanisms of physicochemical reactions (10.21122/1683-6065-2021-4-123-126) | ORCID | 7.53 | 1 |
| 227 | Nonoxidizing heating of chip‑powder dispersions of ferrous m… (10.21122/1683-6065-2021-4-79-89) | ORCID | 7.53 | 1 |
| 228 | Requirements for the mass and heating of blanks selection in… (10.21122/1683-6065-2022-1-121-129) | ORCID | 7.53 | 1 |
| 229 | Nanostructural crystallization of cast iron (10.21122/1683-6065-2022-1-37-39) | ORCID | 7.53 | 1 |
| 230 | Nanostructural crystallization of silumins (10.21122/1683-6065-2022-1-40-42) | ORCID | 7.53 | 1 |
| 231 | Research of forming and sintering processes of copper powder… (10.21122/1683-6065-2022-1-49-54) | ORCID | 7.53 | 1 |
| 232 | Research and processing of shot blasting dust (10.21122/1683-6065-2022-2-34-39) | ORCID | 7.53 | 1 |
| 233 | Structural aspects of deformation hardening with repeated dr… (10.21122/1683-6065-2022-2-44-49) | ORCID | 7.53 | 1 |
| 234 | Development of technology for the production of metal cord w… (10.21122/1683-6065-2022-2-50-53) | ORCID | 7.53 | 1 |
| 235 | The study of visual working conditions in the foundry (10.21122/1683-6065-2022-3-112-115) | ORCID | 7.53 | 1 |
| 236 | Expert assessment of the effectiveness of measures to improv… (10.21122/1683-6065-2022-3-116-121) | ORCID | 7.53 | 1 |
| 237 | Nanostructured recrystallization of iron‑carbon alloys (10.21122/1683-6065-2022-3-27-29) | ORCID | 7.53 | 1 |
| 238 | PoligonSoft for foundry (10.21122/1683-6065-2022-3-40-47) | ORCID | 7.53 | 1 |
| 239 | Translation of hardness numbers in testing of surface‑harden… (10.21122/1683-6065-2022-3-64-69) | ORCID | 7.53 | 1 |
| 240 | The Strength Properties Of Adhesive Joints Used In The Creat… (10.21122/1683-6065-2022-4-115-122) | ORCID | 7.53 | 1 |
| 241 | On the method of aerodynamic sound hardening of metal‑cerami… (10.21122/1683-6065-2022-4-137-138) | ORCID | 7.53 | 1 |
| 242 | On modification of eutectic cast iron graphite (10.21122/1683-6065-2022-4-19-23) | ORCID | 7.53 | 1 |
| 243 | «Green» technologies in metallurgical production – a dream o… (10.21122/1683-6065-2022-4-63-69) | ORCID | 7.53 | 1 |
| 244 | Technical features of controlled cooling of circular workpie… (10.21122/1683-6065-2023-1-106-111) | ORCID | 7.53 | 1 |
| 245 | Trends in the development of foundry production (10.21122/1683-6065-2023-1-26-31) | ORCID | 7.53 | 1 |
| 246 | Research of the liquid‑glass HTS compositions with sand of t… (10.21122/1683-6065-2023-1-35-40) | ORCID | 7.53 | 1 |
| 247 | Performance evaluation of metal mould for casting aluminium… (10.21122/1683-6065-2023-1-51-57) | ORCID | 7.53 | 1 |
| 248 | Evaluation of mechanical properties of glued elements for mo… (10.21122/1683-6065-2023-2-100-106) | ORCID | 7.53 | 1 |
| 249 | Study of the influence of the composition of saturating mixt… (10.21122/1683-6065-2023-2-107-110) | ORCID | 7.53 | 1 |
| 250 | Effect of gases on crystallization of heat-resistant chrom… (10.21122/1683-6065-2023-2-13-16) | ORCID | 7.53 | 1 |
| 251 | Features of using silicon carbide in melting converter steel (10.21122/1683-6065-2023-2-55-60) | ORCID | 7.53 | 1 |
| 252 | Modeling of the process of heating of chip-powder dispersion… (10.21122/1683-6065-2023-2-84-93) | ORCID | 7.53 | 1 |
| 253 | Changing the surface of the 07C11-KV mixed fabric modified b… (10.21122/1683-6065-2023-2-94-99) | ORCID | 7.53 | 1 |
| 254 | Working conditions at the workplaces of foundries’ melting a… (10.21122/1683-6065-2023-3-100-110) | ORCID | 7.53 | 1 |
| 255 | About modification of foundry magnesium alloys (10.21122/1683-6065-2023-3-11-15) | ORCID | 7.53 | 1 |
| 256 | Investigation of the effect of ultrasonic treatment during c… (10.21122/1683-6065-2023-3-28-35) | ORCID | 7.53 | 1 |
| 257 | The effect of special additives on the physico-mechanical pr… (10.21122/1683-6065-2023-3-36-40) | ORCID | 7.53 | 1 |
| 258 | Destruction investigation of foundry sand-liquid-glass cores… (10.21122/1683-6065-2023-3-41-48) | ORCID | 7.53 | 1 |
| 259 | Employees’ working conditions on molding areas of foundry sh… (10.21122/1683-6065-2023-4-109-116) | ORCID | 7.53 | 1 |
| 260 | About elementary particles (10.21122/1683-6065-2023-4-127-130) | ORCID | 7.53 | 1 |
| 261 | On the amplitude of vibrations of atoms of components of har… (10.21122/1683-6065-2023-4-131-132) | ORCID | 7.53 | 1 |
| 262 | О перспективности метода аэродинамического звукового упрочне… (10.21122/1683-6065-2023-4-133-134) | ORCID | 7.53 | 1 |
| 263 | On the influence of aerodynamic sound impact on the dislocat… (10.21122/1683-6065-2023-4-135-136) | ORCID | 7.53 | 1 |
| 264 | Defects in high‑pressure die casting and measures to prevent… (10.21122/1683-6065-2023-4-16-24) | ORCID | 7.53 | 1 |
| 265 | Nanostructural phase transformations in eutectoid reactions… (10.21122/1683-6065-2023-4-30-32) | ORCID | 7.53 | 1 |
| 266 | Technological issues of manufacturing critical castings for… (10.21122/1683-6065-2023-4-33-42) | ORCID | 7.53 | 1 |
| 267 | Criteria for evaluating the effectiveness of bentonites in t… (10.21122/1683-6065-2023-4-43-47) | ORCID | 7.53 | 1 |
| 268 | Mechanisms of modification of magnesium– manganese alloys (10.21122/1683-6065-2023-4-48-51) | ORCID | 7.53 | 1 |
| 269 | Ways of energy saving during thermal and chemicalthermal tre… (10.21122/1683-6065-2023-4-72-80) | ORCID | 7.53 | 1 |
| 270 | Horizontal casting cooling beyond the crystallizer (10.21122/1683-6065-2024-1-16-19) | ORCID | 7.53 | 1 |
| 271 | Experimental impact study of ultra‑fine metal powders on tec… (10.21122/1683-6065-2024-1-20-25) | ORCID | 7.53 | 1 |
| 272 | Defects in castings during high‑pressure casting and measure… (10.21122/1683-6065-2024-1-26-31) | ORCID | 7.53 | 1 |
| 273 | Control of plasticity of high‑strength condition of cold‑for… (10.21122/1683-6065-2024-1-51-54) | ORCID | 7.53 | 1 |
| 274 | Research of the influence of technological parameters of the… (10.21122/1683-6065-2024-1-78-82) | ORCID | 7.53 | 1 |
| 275 | Фотонная и нейтринная материя (10.21122/1683-6065-2024-1-93-95) | ORCID | 7.53 | 1 |
| 276 | The practice of using chill vents in construction injection… (10.21122/1683-6065-2024-2-17-22) | ORCID | 7.53 | 1 |
| 277 | Structural stability during remelting of foundry binary allo… (10.21122/1683-6065-2024-2-29-31) | ORCID | 7.53 | 1 |
| 278 | Analysis of structure and strength properties of heat‑resist… (10.21122/1683-6065-2024-2-57-62) | ORCID | 7.53 | 1 |
| 279 | Technology of flame‑induction heating of ferrous metal shavi… (10.21122/1683-6065-2024-2-72-81) | ORCID | 7.53 | 1 |
| 280 | Features of using SLA‑technology in the manufacture of molds… (10.21122/1683-6065-2024-3-37-40) | ORCID | 7.53 | 1 |
| 281 | Progressive technologies of laser surfacing and gas‑thermal… (10.21122/1683-6065-2024-3-61-65) | ORCID | 7.53 | 1 |
| 282 | Analysis and forecasting of the impact of working conditions… (10.21122/1683-6065-2024-4-130-134) | ORCID | 7.53 | 1 |
| 283 | Investigation of the intensity of strain hardening of low‑ca… (10.21122/1683-6065-2024-4-64-67) | ORCID | 7.53 | 1 |
| 284 | Research of fracture mechanism of steel grade P91 on impact… (10.21122/1683-6065-2024-4-85-94) | ORCID | 7.53 | 1 |
| 285 | Development of a technology for obtaining manganese from was… (10.21122/1683-6065-2025-1-54-57) | ORCID | 7.53 | 1 |
| 286 | Features of the production of technical ceramics for thermal… (10.21122/1683-6065-2025-1-67-72) | ORCID | 7.53 | 1 |
| 287 | Potentials for improving the surface properties of cast comp… (10.21122/1683-6065-2025-3-114-119) | ORCID | 7.53 | 1 |
| 288 | Assessment of the unevenness of plastic deformation in drawi… (10.21122/1683-6065-2025-3-56-60) | ORCID | 7.53 | 1 |
| 289 | Anti-production: on the issue of detecting non-metallic incl… (10.21122/1683-6065-2025-3-69-79) | ORCID | 7.53 | 1 |
| 290 | PULSE FORMATION OF STRUCTURE OF FOUNDRY ALUMINUM ALLOY (10.21122/1683-6065-2017-1-103-109) | ORCID License | 0.00 | 0 |
| 291 | EXPERIMENTAL STUDY ON THE IMPACT OF KEY PARAMETERS OF MELT M… (10.21122/1683-6065-2017-1-115-122) | ORCID License | 0.00 | 0 |
| 292 | COMPUTER MODELING OF STRAINS ON PHASE BOUNDARIES IN DUCTILE… (10.21122/1683-6065-2017-1-123-135) | ORCID License | 0.00 | 0 |
| 293 | KINEMATIC CALCULATION AND SIMULATION OF THE PIERCING IN PIPE… (10.21122/1683-6065-2017-1-143-147) | ORCID License | 0.00 | 0 |
| 294 | COMPLEX MODIFICATION OF GRAY CAST IRON (10.21122/1683-6065-2017-1-16-20) | ORCID License | 0.00 | 0 |
| 295 | MATHEMATICAL MODELING OF ELECTRICAL RESISTIVITY OF ESR SLAG (10.21122/1683-6065-2017-1-21-25) | ORCID License | 0.00 | 0 |
| 296 | DESIGNING OF TURN-OUT CORE BOXES WITH LOOSE SIDES (10.21122/1683-6065-2017-1-30-40) | ORCID License | 0.00 | 0 |
| 297 | THE USE OF THE ALGORITHM EVALUATION OF TECHNOLOGICAL COMPLEX… (10.21122/1683-6065-2017-1-41-44) | ORCID License | 0.00 | 0 |
| 298 | NANOSTRUCTURAL PROCESSES OF MELTING AND CASTING OF CAST IRON… (10.21122/1683-6065-2017-1-7-10) | ORCID License | 0.00 | 0 |
| 299 | DEVELOPING AND TESTING OF NON-ASBESTOS FRICTION MATERIALS IN… (10.21122/1683-6065-2017-1-73-75) | ORCID License | 0.00 | 0 |
| 300 | EFFECTIVENESS OF STATIC THYRISTOR COMPENSATORS SYSTEMS ON TH… (10.21122/1683-6065-2017-1-80-85) | ORCID License | 0.00 | 0 |
| 301 | REALIZATION AND PROSPECTS OF DEVELOPMENT OF SYNERGETIC CAPAC… (10.21122/1683-6065-2017-1-93-96) | ORCID License | 0.00 | 0 |
| 302 | PERFORMANCE OF THE INTERAGENCY WORKING GROUP ON INTRODUCTION… (10.21122/1683-6065-2017-2-104-108) | ORCID License | 0.00 | 0 |
| 303 | DEVELOPMENT EXPERIENCE OF UNIVERSITY SCIENCE IN THE PROVINCE (10.21122/1683-6065-2017-2-109-116) | ORCID License | 0.00 | 0 |
| 304 | POSSIBILITY OF APPLICATION OF SODIUM SILICATE IN MOULDING AN… (10.21122/1683-6065-2017-2-12-14) | ORCID License | 0.00 | 0 |
| 305 | THE ANALYSIS OF THE EXPORT OF SELECTED ITEMS OF FOUNDRY AND… (10.21122/1683-6065-2017-2-131-137) | References ORCID License | 0.00 | 0 |
| 306 | THE STUDY OF CRYSTALLOGRAPHIC PARAMETERS OF NANODISPERSE MOD… (10.21122/1683-6065-2017-2-20-23) | ORCID License | 0.00 | 0 |
| 307 | METHOD OF MEASUREMENT OF STRENGTH OF CORE CASTING PAINT AT H… (10.21122/1683-6065-2017-2-24-26) | ORCID License | 0.00 | 0 |
| 308 | PROTECTORS FOR PROOFING OF IRON-CARBON-ALLOYS FROM CORROSIVE… (10.21122/1683-6065-2017-2-27-30) | ORCID License | 0.00 | 0 |
| 309 | ASSESSMENT OF RANGES OF POSSIBLE CHANGE OF TEMPORARY RESISTA… (10.21122/1683-6065-2017-2-40-45) | ORCID License | 0.00 | 0 |
| 310 | IMPROVEMENT OF CALIBRATION OF CONE-SHAPED ROLLS OF THE PIERC… (10.21122/1683-6065-2017-2-46-50) | ORCID License | 0.00 | 0 |
| 311 | OLAP TECHNOLOGY AS DECISION-MAKING SUPPORT TOOL (10.21122/1683-6065-2017-2-51-53) | References ORCID License | 0.00 | 0 |
| 312 | CARRYING OUT OF MEASUREMENT SYSTEM ANALYSIS (MSA) ON OJSC «B… (10.21122/1683-6065-2017-2-54-57) | References ORCID License | 0.00 | 0 |
| 313 | INTENSIFICATION OF THE PROCESS OF SEPARATION OF THE BAR ASSO… (10.21122/1683-6065-2017-2-65-69) | ORCID License | 0.00 | 0 |
| 314 | THE STOCHASTIC APPROACHES OF PROCESSES’ DESIGN IN VACUUM-PLA… (10.21122/1683-6065-2017-2-76-80) | ORCID License | 0.00 | 0 |
| 315 | OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT… (10.21122/1683-6065-2017-2-97-103) | ORCID License | 0.00 | 0 |
| 316 | PROSPECTS FOR THE USE OF CORED WIRES WITH FILLER «SOLID» CAL… (10.21122/1683-6065-2017-3-11-12) | References ORCID License | 0.00 | 0 |
| 317 | THE INFLUENCE OF MORPHOLOGY OF DIAMOND SYNTHETIC MICROPOWDER… (10.21122/1683-6065-2017-3-17-20) | References ORCID License | 0.00 | 0 |
| 318 | THE CHOICE OF ECONOMICALLY EXPEDIENT USE OF FERROUS METALS C… (10.21122/1683-6065-2017-3-21-23) | References ORCID License | 0.00 | 0 |
| 319 | WAYS TO INCREASE QUALITY OF PRODUCTS AT THE BAR STOCK WIRE R… (10.21122/1683-6065-2017-3-24-26) | ORCID License | 0.00 | 0 |
| 320 | EXPERIENCE OF APPLICATION OF A PORTABLE OPTICO – EMISSION SP… (10.21122/1683-6065-2017-3-27-29) | References ORCID License | 0.00 | 0 |
| 321 | THE ORGANIZATION OF INTERLABORATORY COLLATING TESTS IN THE C… (10.21122/1683-6065-2017-3-30-33) | References ORCID License | 0.00 | 0 |
| 322 | NANOSTRUCTURAL PROCESSES OF MELTING AND MOULDING OF CAST IRO… (10.21122/1683-6065-2017-3-45-48) | ORCID License | 0.00 | 0 |
| 323 | CONTROL OF CHEMICAL COMPOSITION OF CASTING BRASS IN INGOTS U… (10.21122/1683-6065-2017-3-49-53) | ORCID License | 0.00 | 0 |
| 324 | FORMATION OF THE STRUCTURE AND PROPERTIES OF THE ZONE OF ALL… (10.21122/1683-6065-2017-3-54-57) | ORCID License | 0.00 | 0 |
| 325 | THE FORMATION OF BIMETALLIC CONNECTION IN WELDER DEPOSITION… (10.21122/1683-6065-2017-3-58-63) | Abstract ORCID License | 0.00 | 0 |
| 326 | IMPROVING THE SYSTEM OF REMUNERATION OF PERSONNEL OF THE ENT… (10.21122/1683-6065-2017-3-78-80) | References ORCID License | 0.00 | 0 |
| 327 | IMPROVING THE SYSTEM OF REMUNERATION OF PERSONNEL OF THE ENT… (10.21122/1683-6065-2017-3-81-83) | References ORCID License | 0.00 | 0 |
| 328 | DECREASE IN LABOR INPUT OF PRODUCTION DUE TO RATIONAL USE OF… (10.21122/1683-6065-2017-3-84-86) | References ORCID License | 0.00 | 0 |
| 329 | CENTRALIZATION OF SERVICE MANAGEMENT WORK EXPERIENCE OJSC «B… (10.21122/1683-6065-2017-3-87-90) | References ORCID License | 0.00 | 0 |
| 330 | THE INFLUENCE OF MECHANICALLY ALLOYED MODIFYING MASTER LIGAT… (10.21122/1683-6065-2017-4-102-108) | ORCID License | 0.00 | 0 |
| 331 | APPLICABILITY OF THE RESULTS OF CERTIFICATION OF WORKPLACES… (10.21122/1683-6065-2017-4-126-133) | References ORCID License | 0.00 | 0 |
| 332 | PROTECTION OF THE AIR OF THE FOUNDRY ENTERPRISES AGAINST POL… (10.21122/1683-6065-2017-4-138-142) | Abstract ORCID License | 0.00 | 0 |
| 333 | EXPERIENCE IN THE IMPLEMENTATION OF THE ENERGY MANAGEMENT SY… (10.21122/1683-6065-2017-4-143-147) | References ORCID License | 0.00 | 0 |
| 334 | DEVELOPMENT OF DECLARATIONS OF INDUSTRIAL SAFETY OF FOUNDRY… (10.21122/1683-6065-2017-4-148-149) | References ORCID License | 0.00 | 0 |
| 335 | SYNTHETIC APPROACH TO THE DEVELOPMENT OF TECHNOLOGY FOR MANU… (10.21122/1683-6065-2017-4-16-19) | References ORCID License | 0.00 | 0 |
| 336 | ANALYSIS OF THE REQUIREMENTS FOR THE QUALITY CHARACTERISTICS… (10.21122/1683-6065-2017-4-20-22) | ORCID License | 0.00 | 0 |
| 337 | MASTERING THE PRODUCTION OF A CONTINUOUS CASTING BILLET DIAM… (10.21122/1683-6065-2017-4-23-25) | References ORCID License | 0.00 | 0 |
| 338 | IR IMAGING AND VIBRATORY METHODS OF CONTROL AND DIAGNOSTICS… (10.21122/1683-6065-2017-4-37-41) | ORCID License | 0.00 | 0 |
| 339 | NEW-GENERATION STAINLESS STEEL SYSTEMS FOR METALLURGICAL PRO… (10.21122/1683-6065-2017-4-42-47) | References ORCID License | 0.00 | 0 |
| 340 | THE EFFECT OF CHEMICAL TREATMENT OF RECYCLED WATER IN THE PR… (10.21122/1683-6065-2017-4-77-83) | ORCID License | 0.00 | 0 |
| 341 | OPTIMIZATION OF THE HYDRODYNAMICS OF GATING-FEEDING SYSTEMS… (10.21122/1683-6065-2017-4-84-88) | ORCID License | 0.00 | 0 |
| 342 | THE ROLE OF REFRACTORY FILLER IN THE PROCESSES OF STRUCTURAL… (10.21122/1683-6065-2017-4-89-93) | ORCID License | 0.00 | 0 |
| 343 | DETERMINATION OF OPTIMAL CUTTING CONDITIONS FOR HIGH-SPEED C… (10.21122/1683-6065-2018-1-106-109) | References ORCID License | 0.00 | 0 |
| 344 | 30 EARS ANNIVERSARY OF BELARUSSIAN METALCORD (10.21122/1683-6065-2018-1-113-119) | References ORCID License | 0.00 | 0 |
| 345 | ALUMINIUM BRONZE. NANOSTRUCTURAL PROCESSES OF MELTING AND MO… (10.21122/1683-6065-2018-1-12-15) | ORCID License | 0.00 | 0 |
| 346 | THE IMPACT OF CHEMICAL COMPOSITION ON MECHANICAL PROPERTIES… (10.21122/1683-6065-2018-1-120-123) | ORCID License | 0.00 | 0 |
| 347 | KINEMATICAL FEATURES OF FORMATION OF A FLANGE WITH MINIMUM T… (10.21122/1683-6065-2018-1-132-136) | ORCID License | 0.00 | 0 |
| 348 | DIRECT MANUFACTURING OF METAL PARTS USING LOM-TECHNOLOGY (10.21122/1683-6065-2018-1-137-143) | ORCID License | 0.00 | 0 |
| 349 | OPTIMIZATION OF COMPOSITION AND APPLICATION SCHEME OF CARBON… (10.21122/1683-6065-2018-1-144-147) | ORCID License | 0.00 | 0 |
| 350 | PRODUCTION OF ROTARY ENGINES’ PARTS FROM ALUMINUM ALLOYS USI… (10.21122/1683-6065-2018-1-16-21) | ORCID License | 0.00 | 0 |
| 351 | MODERN EQUIPMENT FOR REFINING AND CASTING OF STEEL AND ALLOY… (10.21122/1683-6065-2018-1-28-33) | References ORCID License | 0.00 | 0 |
| 352 | INVESTIGATION OF CARBON INFLUENCE IN CROMIUMIUM CAST IRONS F… (10.21122/1683-6065-2018-1-41-46) | ORCID License | 0.00 | 0 |
| 353 | ECOCURE BLUE – NEW COLD BOX SYSTEM WITH ULTRA-HIGH EFFICIENC… (10.21122/1683-6065-2018-1-63-68) | References ORCID License | 0.00 | 0 |
| 354 | IMPROVEMENT OF TECHNICAL CHARACTERISTICS ON SAND-CLAY FORMS… (10.21122/1683-6065-2018-1-75-77) | ORCID License | 0.00 | 0 |
| 355 | INFLUENCE OF ALKALINE – EARTH METALS ON ANODIC BEHAVIOR OF A… (10.21122/1683-6065-2018-1-84-89) | ORCID License | 0.00 | 0 |
| 356 | RECYCLING AND UTILIZATION OF FE-C METALLURGICAL WASTES (10.21122/1683-6065-2018-1-96-99) | ORCID License | 0.00 | 0 |
| 357 | STRUCTURAL PHASE STATE AND TRIBOTECHNICAL PROPERTIES OF CAST… (10.21122/1683-6065-2018-2-103-107) | ORCID License | 0.00 | 0 |
| 358 | FORMATION OF NANOCRYSTAL STATE IN DETAILS OF CARBON STRUCURA… (10.21122/1683-6065-2018-2-113-118) | ORCID License | 0.00 | 0 |
| 359 | NEW COMPOSITIONS OF TOOL STEELS FOR COLD AND HOT FORMING AND… (10.21122/1683-6065-2018-2-119-123) | ORCID License | 0.00 | 0 |
| 360 | PERFORATIONS ON THE SURFACE OF IRON CASTINGS (10.21122/1683-6065-2018-2-37-42) | ORCID License | 0.00 | 0 |
| 361 | A STUDY OF WASTES GENERATED IN THE PRODUCTION OF LEAD (10.21122/1683-6065-2018-2-43-49) | ORCID License | 0.00 | 0 |
| 362 | EFFICIENCY UPGRADING IN UTILIZATION OF LIQUID-GLASS MIXTURES… (10.21122/1683-6065-2018-2-50-56) | ORCID License | 0.00 | 0 |
| 363 | MODELING OF THE TEMPERATURE DISTRIBUTION DENSITY FUNCTION IN… (10.21122/1683-6065-2018-2-57-64) | ORCID License | 0.00 | 0 |
| 364 | INDICATORS OF FERROUS METALLURGY OF THE CIS COUNTRIES AND FO… (10.21122/1683-6065-2018-2-65-72) | ORCID License | 0.00 | 0 |
| 365 | DEVICE FOR IMPROVING THE PLASTIC PROPERTIES OF THE WIRE RML (10.21122/1683-6065-2018-2-73-74) | References ORCID License | 0.00 | 0 |
| 366 | DETERMINATION OF THE POLISHING QUALITY IN THE WORKING CHANNE… (10.21122/1683-6065-2018-2-75-81) | ORCID License | 0.00 | 0 |
| 367 | EXPERIENCE IN THE USE OF THE MEASURING DEVICE RIB TYPE RM 20… (10.21122/1683-6065-2018-2-82-84) | ORCID License | 0.00 | 0 |
| 368 | MODIFICATION OF THE BRASS COATING BY COBALT (10.21122/1683-6065-2018-2-85-88) | ORCID License | 0.00 | 0 |
| 369 | EXPERIENCE WITH THE USE OF THE CLIMATIC CHAMBER FOR ARTIFICI… (10.21122/1683-6065-2018-2-89-93) | ORCID License | 0.00 | 0 |
| 370 | A DETAILED STUDY OF THE PERFORMANCE AND OPTIMAL CHOICE OF AB… (10.21122/1683-6065-2018-2-94-98) | ORCID License | 0.00 | 0 |
| 371 | Strength analysis of banded roll for asymmetric rolling of f… (10.21122/1683-6065-2018-3-101-109) | ORCID | 0.00 | 0 |
| 372 | Department «Metallurgy of ferrous and non-ferrous alloys» (10.21122/1683-6065-2018-3-11-18) | References ORCID | 0.00 | 0 |
| 373 | Influence of the technology of aluminum waste melting on the… (10.21122/1683-6065-2018-3-118-124) | ORCID | 0.00 | 0 |
| 374 | Generation, structure and properties of the modified welding… (10.21122/1683-6065-2018-3-131-140) | ORCID | 0.00 | 0 |
| 375 | Training of engineers on labor protection in technical unive… (10.21122/1683-6065-2018-3-19-21) | References ORCID | 0.00 | 0 |
| 376 | Crystallization of metals and alloys. Problem. Solutions (10.21122/1683-6065-2018-3-22-25) | ORCID | 0.00 | 0 |
| 377 | Furnace ecology (10.21122/1683-6065-2018-3-50-57) | References ORCID | 0.00 | 0 |
| 378 | Extraction from aqueous solutions ions of iron and lead by f… (10.21122/1683-6065-2018-3-58-62) | ORCID | 0.00 | 0 |
| 379 | Optimization of two-stage cooling conditions for wire rod di… (10.21122/1683-6065-2018-3-63-66) | References ORCID | 0.00 | 0 |
| 380 | Overview of test methods to determine strength and plastic p… (10.21122/1683-6065-2018-3-67-70) | References ORCID | 0.00 | 0 |
| 381 | Defects of welded joints of the wire, causing breakages duri… (10.21122/1683-6065-2018-3-71-75) | References ORCID | 0.00 | 0 |
| 382 | Reverse grooving for cross-screw reduction of tube bullets (10.21122/1683-6065-2018-3-82-87) | ORCID | 0.00 | 0 |
| 383 | Peculiarities of laser cladding with feeding of the filler t… (10.21122/1683-6065-2018-3-95-100) | ORCID | 0.00 | 0 |
| 384 | Research the causes of formation of internal pores (blowhole… (10.21122/1683-6065-2018-4-103-106) | ORCID | 0.00 | 0 |
| 385 | Mathematical modeling of the distribution of dust emissions… (10.21122/1683-6065-2018-4-107-113) | ORCID | 0.00 | 0 |
| 386 | Technological features of production of copper-based composi… (10.21122/1683-6065-2018-4-114-118) | ORCID | 0.00 | 0 |
| 387 | Forming of the properties of an alloy on a Co-Cr-basis using… (10.21122/1683-6065-2018-4-119-126) | ORCID | 0.00 | 0 |
| 388 | Some aspects of structure formation in sintering process bet… (10.21122/1683-6065-2018-4-127-132) | ORCID | 0.00 | 0 |
| 389 | Solutions of the scientific problem of modifying of foundry… (10.21122/1683-6065-2018-4-15-18) | ORCID | 0.00 | 0 |
| 390 | The conceptual development areas in the developing technolog… (10.21122/1683-6065-2018-4-155-159) | ORCID | 0.00 | 0 |
| 391 | Export of foundry and metallurgical products from Belarus, R… (10.21122/1683-6065-2018-4-165-172) | References ORCID | 0.00 | 0 |
| 392 | Complex technology of secondary aluminium alloys quality inc… (10.21122/1683-6065-2018-4-19-23) | ORCID | 0.00 | 0 |
| 393 | Joint extraction of nitrate ions and of iron ions by the fil… (10.21122/1683-6065-2018-4-32-37) | ORCID | 0.00 | 0 |
| 394 | New perspectives of additional doping and restructuring of c… (10.21122/1683-6065-2018-4-34-31) | ORCID | 0.00 | 0 |
| 395 | Integration of neural models in the process of technological… (10.21122/1683-6065-2018-4-45-49) | ORCID | 0.00 | 0 |
| 396 | Sorting nipple castings from malleable cast iron from the re… (10.21122/1683-6065-2018-4-55-64) | ORCID | 0.00 | 0 |
| 397 | Research on the effect of the grooving of mill rolls of the… (10.21122/1683-6065-2018-4-65-69) | ORCID | 0.00 | 0 |
| 398 | The development and introduction of production technology an… (10.21122/1683-6065-2018-4-70-74) | Abstract References ORCID | 0.00 | 0 |
| 399 | Tribological properties of friction composites modified by t… (10.21122/1683-6065-2018-4-75-83) | ORCID | 0.00 | 0 |
| 400 | The study and determination of causes of fracture of the sha… (10.21122/1683-6065-2018-4-84-89) | Abstract ORCID | 0.00 | 0 |
| 401 | The role of tension to ensure the accuracy of profiles in co… (10.21122/1683-6065-2018-4-90-93) | ORCID | 0.00 | 0 |
| 402 | Centralization of maintenance services hardware shops (10.21122/1683-6065-2018-4-94-96) | Abstract References ORCID | 0.00 | 0 |
| 403 | The experience of modernization of mills of wet wire drawing… (10.21122/1683-6065-2018-4-97-102) | ORCID | 0.00 | 0 |
| 404 | The quality of semi-finished steel (10.21122/1683-6065-2019-1-102-107) | ORCID | 0.00 | 0 |
| 405 | The influence of nitrogen content on the amount of austenite… (10.21122/1683-6065-2019-1-108-111) | ORCID | 0.00 | 0 |
| 406 | Technological features of Ti–Cr–B–N coatings formation by ma… (10.21122/1683-6065-2019-1-112-118) | ORCID | 0.00 | 0 |
| 407 | Assessment of influence of input method of modifying additiv… (10.21122/1683-6065-2019-1-119-123) | ORCID | 0.00 | 0 |
| 408 | Structure for interaction software process modules in the de… (10.21122/1683-6065-2019-1-28-33) | ORCID | 0.00 | 0 |
| 409 | Ventilation of molds for die casting (10.21122/1683-6065-2019-1-34-37) | ORCID | 0.00 | 0 |
| 410 | Improvement of management system of technological equipment… (10.21122/1683-6065-2019-1-38-44) | ORCID | 0.00 | 0 |
| 411 | Development of technology for lining steel-tapping hole of s… (10.21122/1683-6065-2019-1-57-60) | References ORCID | 0.00 | 0 |
| 412 | Factors influencing hardenability of steels on the example o… (10.21122/1683-6065-2019-1-66-69) | References ORCID | 0.00 | 0 |
| 413 | The requirements of the international standards on traceabil… (10.21122/1683-6065-2019-1-70-72) | References ORCID | 0.00 | 0 |
| 414 | The development of production technology of wire rod from ch… (10.21122/1683-6065-2019-1-78-82) | References ORCID | 0.00 | 0 |
| 415 | The dependence of the adhesive properties of the steel cord… (10.21122/1683-6065-2019-1-83-88) | ORCID | 0.00 | 0 |
| 416 | The influence of the characteristics of breaking test units… (10.21122/1683-6065-2019-1-89-94) | References ORCID | 0.00 | 0 |
| 417 | The 70-year history of metallurgical production at the Minsk… (10.21122/1683-6065-2019-1-95-101) | ORCID | 0.00 | 0 |
| 418 | Modification of surface layers by high energy treatment (10.21122/1683-6065-2019-2-109-116) | ORCID | 0.00 | 0 |
| 419 | Centrifugal casting – perspective technology of production o… (10.21122/1683-6065-2019-2-23-27) | ORCID | 0.00 | 0 |
| 420 | Scientific problem of modifying of primary crystals a β -pha… (10.21122/1683-6065-2019-2-36-38) | ORCID | 0.00 | 0 |
| 421 | Forging plant OJSC «MAZ». 70 years of history and prospects… (10.21122/1683-6065-2019-2-39-44) | References ORCID | 0.00 | 0 |
| 422 | The efficiency of drawing high-strength wire with a high pro… (10.21122/1683-6065-2019-2-45-47) | ORCID | 0.00 | 0 |
| 423 | Research of defects of hot-rolled steel having rolling natur… (10.21122/1683-6065-2019-2-60-68) | ORCID | 0.00 | 0 |
| 424 | Using mechanisms of object-oriented programming for the unif… (10.21122/1683-6065-2019-2-67-71) | ORCID | 0.00 | 0 |
| 425 | Determination of residual strain in steel wire cord by chemi… (10.21122/1683-6065-2019-2-72-75) | ORCID | 0.00 | 0 |
| 426 | A study on the causes of the destruction of the high pressur… (10.21122/1683-6065-2019-2-76-79) | ORCID | 0.00 | 0 |
| 427 | A study on the causes of the inconsistencies of the microstr… (10.21122/1683-6065-2019-2-80-84) | References ORCID | 0.00 | 0 |
| 428 | Change of the structure of the surface of galvanic coatings… (10.21122/1683-6065-2019-2-85-91) | Abstract ORCID | 0.00 | 0 |
| 429 | Thermophysical analisis of modification of the surface of th… (10.21122/1683-6065-2019-2-92-98) | ORCID | 0.00 | 0 |
| 430 | The ways to ensure fatigue strength of cold-formed rebars. F… (10.21122/1683-6065-2019-3-102-106) | ORCID | 0.00 | 0 |
| 431 | Special aspects of the measurement of the internal geometric… (10.21122/1683-6065-2019-3-107-111) | ORCID | 0.00 | 0 |
| 432 | Study of the effect of the application of the double finish… (10.21122/1683-6065-2019-3-112-117) | ORCID | 0.00 | 0 |
| 433 | Force calculation of the process of briquetting powder, chip… (10.21122/1683-6065-2019-3-118-125) | ORCID | 0.00 | 0 |
| 434 | The impact of technological methods of heat treatment of mem… (10.21122/1683-6065-2019-3-126-132) | ORCID | 0.00 | 0 |
| 435 | Morphology of the surface and magnetic resonance properties… (10.21122/1683-6065-2019-3-142-146) | ORCID | 0.00 | 0 |
| 436 | Surface energy of ultrafine particles as a tool for creating… (10.21122/1683-6065-2019-3-45-53) | ORCID | 0.00 | 0 |
| 437 | Testing of the physical and mechanical properties of cast ir… (10.21122/1683-6065-2019-3-65-69) | ORCID | 0.00 | 0 |
| 438 | Matematical modeling of the process of enlarging the austeni… (10.21122/1683-6065-2019-3-74-84) | ORCID | 0.00 | 0 |
| 439 | Modern formula of quality. Foundry production and metallurgy (10.21122/1683-6065-2019-3-89-92) | ORCID | 0.00 | 0 |
| 440 | The increase in turnover of steel-teeming ladles with a comb… (10.21122/1683-6065-2019-3-93-95) | References ORCID | 0.00 | 0 |
| 441 | Rational redistribution of waste of resources. Manufacturing… (10.21122/1683-6065-2019-3-96-98) | References ORCID | 0.00 | 0 |
| 442 | The effect of different types of ageing on adhesive properti… (10.21122/1683-6065-2019-3-99-101) | References ORCID | 0.00 | 0 |
| 443 | Conversion of cast carbon steel into composite material (10.21122/1683-6065-2019-4-100-106) | ORCID | 0.00 | 0 |
| 444 | Increased electrical conductivity dispersion -hardened coppe… (10.21122/1683-6065-2019-4-115-122) | ORCID | 0.00 | 0 |
| 445 | Selection of the optimal version of the rolling rings of sta… (10.21122/1683-6065-2019-4-43-47) | ORCID | 0.00 | 0 |
| 446 | Influence of roughness of a landing aperture of a frame on q… (10.21122/1683-6065-2019-4-48-52) | ORCID | 0.00 | 0 |
| 447 | Ensuring the safety of the surface of calibrated rolled prod… (10.21122/1683-6065-2019-4-53-57) | References ORCID | 0.00 | 0 |
| 448 | Defect “steel-melting captivity and swelling” on the inner s… (10.21122/1683-6065-2019-4-58-62) | ORCID | 0.00 | 0 |
| 449 | Motivation of personnel at OJSC «BSW – Management Company of… (10.21122/1683-6065-2019-4-63-67) | References ORCID | 0.00 | 0 |
| 450 | Suppliers management tactics as a concept of sustainable ent… (10.21122/1683-6065-2019-4-68-71) | ORCID | 0.00 | 0 |
| 451 | The influence of sample preparation quality on the results o… (10.21122/1683-6065-2019-4-72-75) | ORCID | 0.00 | 0 |
| 452 | Kinetics of extraction from water solutions of Fe<sup>… (10.21122/1683-6065-2019-4-76-80) | ORCID | 0.00 | 0 |
| 453 | Upgrading of die casting section as one of the directions to… (10.21122/1683-6065-2019-4-90-93) | References ORCID | 0.00 | 0 |
| 454 | Research of tribotechnical characteristics of materials used… (10.21122/1683-6065-2020-1-110-115) | ORCID | 0.00 | 0 |
| 455 | Particularities of structure formation of aluminum-copper co… (10.21122/1683-6065-2020-1-116-121) | ORCID | 0.00 | 0 |
| 456 | A study of working conditions in the heat-treating workshops (10.21122/1683-6065-2020-1-125-128) | References ORCID | 0.00 | 0 |
| 457 | Development of a method for effective strengthening rolled r… (10.21122/1683-6065-2020-1-21-24) | ORCID | 0.00 | 0 |
| 458 | Influence of unevened grains of metal on the mechanical prop… (10.21122/1683-6065-2020-1-31-33) | ORCID | 0.00 | 0 |
| 459 | Checking the sensitivity and accuracy of humidity indicators (10.21122/1683-6065-2020-1-38-40) | ORCID | 0.00 | 0 |
| 460 | Калибровка стационарных твердомеров по шкалам Роквелла, Брин… (10.21122/1683-6065-2020-1-41-43) | ORCID | 0.00 | 0 |
| 461 | Analysis of the applicability of steel 20MnCrS5 for gears of… (10.21122/1683-6065-2020-1-44-49) | ORCID | 0.00 | 0 |
| 462 | Bending technology of high strength steel sheets and tools f… (10.21122/1683-6065-2020-1-50-55) | ORCID | 0.00 | 0 |
| 463 | Influence of non-ferrous metals on the structural quality of… (10.21122/1683-6065-2020-1-65-73) | ORCID | 0.00 | 0 |
| 464 | Reverse correction parameters during helical reduction (10.21122/1683-6065-2020-1-74-77) | ORCID | 0.00 | 0 |
| 465 | Investigation of increasing the recovery rate of refi pallad… (10.21122/1683-6065-2020-1-78-86) | Abstract ORCID | 0.00 | 0 |
| 466 | Complex processing of tin-lead dross into solders and ligatu… (10.21122/1683-6065-2020-1-93-98) | ORCID | 0.00 | 0 |
| 467 | The influence of heat treatment on the structural phase stat… (10.21122/1683-6065-2020-2-22-25) | ORCID | 0.00 | 0 |
| 468 | Structure, physical and mechanical properties of bronze cast… (10.21122/1683-6065-2020-2-26-28) | ORCID | 0.00 | 0 |
| 469 | Influence of the quality of compounds on the adhesion proper… (10.21122/1683-6065-2020-2-36-41) | ORCID | 0.00 | 0 |
| 470 | Determination of chromium (VI) in the dust of gas treatment… (10.21122/1683-6065-2020-2-42-44) | References ORCID | 0.00 | 0 |
| 471 | Spectral analysis of UV-spectrum elements in steel using por… (10.21122/1683-6065-2020-2-45-47) | ORCID | 0.00 | 0 |
| 472 | Influence of mechanical correction on the geometric and mech… (10.21122/1683-6065-2020-2-48-52) | ORCID | 0.00 | 0 |
| 473 | Uniform system for grouping of steels in welding manufacture… (10.21122/1683-6065-2020-2-63-68) | References ORCID | 0.00 | 0 |
| 474 | Dynamic alloying of high manganese steel (10.21122/1683-6065-2020-2-69-74) | ORCID | 0.00 | 0 |
| 475 | Relativity: chronoeometric drawings (10.21122/1683-6065-2020-2-81-89) | ORCID | 0.00 | 0 |
| 476 | Influence of abrasive materials on the quality of analytical… (10.21122/1683-6065-2020-3-112-116) | ORCID | 0.00 | 0 |
| 477 | Construction of a modern high-performance foundry (10.21122/1683-6065-2020-3-121-124) | References ORCID | 0.00 | 0 |
| 478 | Export deliveries of certain types of products of the foundr… (10.21122/1683-6065-2020-3-125-132) | References ORCID | 0.00 | 0 |
| 479 | Production of silumins with highly dispersed inverted micros… (10.21122/1683-6065-2020-3-23-30) | ORCID | 0.00 | 0 |
| 480 | Development of the composition of a lubricant for injection… (10.21122/1683-6065-2020-3-31-35) | ORCID | 0.00 | 0 |
| 481 | Influence of alloying elements and heat treatment on the mec… (10.21122/1683-6065-2020-3-36-40) | ORCID | 0.00 | 0 |
| 482 | Application of classical numerical methods in the calculatio… (10.21122/1683-6065-2020-3-41-47) | ORCID | 0.00 | 0 |
| 483 | Clad rolled reinforcing bars (10.21122/1683-6065-2020-3-56-58) | References ORCID | 0.00 | 0 |
| 484 | Production of metal cord construction size 7 x 7 x 0,22… (10.21122/1683-6065-2020-3-59-61) | ORCID | 0.00 | 0 |
| 485 | Determination of the mass fraction of potassium and sodium o… (10.21122/1683-6065-2020-3-62-66) | ORCID | 0.00 | 0 |
| 486 | Modernization of the cable car in order to take into account… (10.21122/1683-6065-2020-3-67-70) | ORCID | 0.00 | 0 |
| 487 | Research of high strength steels bending (10.21122/1683-6065-2020-3-71-78) | ORCID | 0.00 | 0 |
| 488 | Surface morphology, magnetic resonance and antistatic proper… (10.21122/1683-6065-2020-3-79-83) | ORCID | 0.00 | 0 |
| 489 | Structure and properties forming in ductile iron during isot… (10.21122/1683-6065-2020-4-118-124) | ORCID | 0.00 | 0 |
| 490 | On the influence of elastic interphase deformations on the w… (10.21122/1683-6065-2020-4-148-151) | ORCID | 0.00 | 0 |
| 491 | Estimation of the cost price of the enterprise with the poss… (10.21122/1683-6065-2020-4-163-165) | References ORCID | 0.00 | 0 |
| 492 | Constructive features of rotary furnaces (10.21122/1683-6065-2020-4-49-59) | ORCID | 0.00 | 0 |
| 493 | Analisys of thermal processes during induction surfacing (10.21122/1683-6065-2020-4-60-63) | ORCID | 0.00 | 0 |
| 494 | Technological features of piston casting (10.21122/1683-6065-2020-4-64-67) | ORCID | 0.00 | 0 |
| 495 | Features of technology for manufacturing cast toolbills from… (10.21122/1683-6065-2020-4-68-74) | ORCID | 0.00 | 0 |
| 496 | Investigation of the nature of defects on the outer surface… (10.21122/1683-6065-2020-4-90-93) | ORCID | 0.00 | 0 |
| 497 | Experience in conducting tests on a torsiometer to determine… (10.21122/1683-6065-2020-4-94-98) | References ORCID | 0.00 | 0 |
| 498 | Efficiency of using alternative sources of heat in electric… (10.21122/1683-6065-2020-4-99-105) | ORCID | 0.00 | 0 |
| 499 | Research of the efficiency of the one-step process for produ… (10.21122/1683-6065-2021-1-100-105) | ORCID | 0.00 | 0 |
| 500 | Interaction of laser radiation with the material during prod… (10.21122/1683-6065-2021-1-114-123) | ORCID | 0.00 | 0 |
| 501 | Neutralization of solvent vapors of brand 646 by the adsorpt… (10.21122/1683-6065-2021-1-130-136) | ORCID | 0.00 | 0 |
| 502 | Production of cast iron during the melting of mineral raw ma… (10.21122/1683-6065-2021-1-43-48) | ORCID | 0.00 | 0 |
| 503 | Ausferritic (bainitic) cast iron: Harmonization of internati… (10.21122/1683-6065-2021-1-56-72) | ORCID | 0.00 | 0 |
| 504 | Identification of reasons for non-compliance of mechanical p… (10.21122/1683-6065-2021-1-78-85) | ORCID | 0.00 | 0 |
| 505 | Determination of phosphorus mass fraction in steels of plasm… (10.21122/1683-6065-2021-1-86-90) | ORCID | 0.00 | 0 |
| 506 | Particularities of metrological control of non-contact syste… (10.21122/1683-6065-2021-1-91-94) | References ORCID | 0.00 | 0 |
| 507 | The ways to increase the durability of cutting tools (sinter… (10.21122/1683-6065-2021-1-95-99) | ORCID | 0.00 | 0 |
| 508 | Experience in the use of absorption and biochemical installa… (10.21122/1683-6065-2021-2-105-108) | ORCID | 0.00 | 0 |
| 509 | Relativity: photon (10.21122/1683-6065-2021-2-109-119) | ORCID | 0.00 | 0 |
| 510 | Investigation of the technological parameters of cored casti… (10.21122/1683-6065-2021-2-32-36) | References ORCID | 0.00 | 0 |
| 511 | Modification of cast alloys nanostructured material (10.21122/1683-6065-2021-2-37-41) | ORCID | 0.00 | 0 |
| 512 | Optical-emission spectrometry method with inductively couple… (10.21122/1683-6065-2021-2-49-53) | Abstract ORCID | 0.00 | 0 |
| 513 | Influence of the hydraulic pump unit on the quality of the r… (10.21122/1683-6065-2021-2-54-60) | ORCID | 0.00 | 0 |
| 514 | Improvement of wear-resistant properties of steel 30Н3MF wit… (10.21122/1683-6065-2021-2-81-86) | ORCID | 0.00 | 0 |
| 515 | Activation of diffusion during the formation of boride layer… (10.21122/1683-6065-2021-2-94-99) | ORCID | 0.00 | 0 |
| 516 | In memory of Ten E. B. (1941-2021) (10.21122/1683-6065-2021-3-125) | References ORCID | 0.00 | 0 |
| 517 | Investigation of breaks of the «Sparking» type of brass‑plat… (10.21122/1683-6065-2021-3-29-34) | ORCID | 0.00 | 0 |
| 518 | Establishing the true causes of defects to ensure the qualit… (10.21122/1683-6065-2021-3-35-39) | ORCID | 0.00 | 0 |
| 519 | Modernization of the brake system of unwinding on rope machi… (10.21122/1683-6065-2021-3-46-49) | References ORCID | 0.00 | 0 |
| 520 | Timely diagnostics of hydraulic equipment in metallurgical p… (10.21122/1683-6065-2021-3-50-54) | References ORCID | 0.00 | 0 |
| 521 | Analysis of the causes and conditions for the formation of s… (10.21122/1683-6065-2021-3-55-60) | ORCID | 0.00 | 0 |
| 522 | Modern materials and technologies in the production of artif… (10.21122/1683-6065-2021-3-78-81) | ORCID | 0.00 | 0 |
| 523 | Investigation of the effect of vacuum on the curing of mixtu… (10.21122/1683-6065-2021-3-82-87) | ORCID | 0.00 | 0 |
| 524 | Dependence of the fractality of the silica gel on the method… (10.21122/1683-6065-2021-3-88-90) | ORCID | 0.00 | 0 |
| 525 | Fullerenes and prospects of their use in foundry and metallu… (10.21122/1683-6065-2021-3-91-96) | ORCID | 0.00 | 0 |
| 526 | Investigation of the microstructure evolution of 7CrMn2WMo e… (10.21122/1683-6065-2021-4-106-111) | ORCID | 0.00 | 0 |
| 527 | Structural‑phase composition of a gas‑thermal coating of Fe‑… (10.21122/1683-6065-2021-4-112-115) | ORCID | 0.00 | 0 |
| 528 | Production of ferroalloys in rotary tilting furnaces (10.21122/1683-6065-2021-4-19-23) | ORCID | 0.00 | 0 |
| 529 | Laboratory methods for the study of rod mixtures at high tem… (10.21122/1683-6065-2021-4-24-27) | ORCID | 0.00 | 0 |
| 530 | Neutralization of solvent vapors of brand 650 by the adsorpt… (10.21122/1683-6065-2021-4-28-32) | ORCID | 0.00 | 0 |
| 531 | Technology and equipment of vertical‑stack molding for the p… (10.21122/1683-6065-2021-4-33-37) | References ORCID | 0.00 | 0 |
| 532 | Automatic control of the physical and mechanical properties… (10.21122/1683-6065-2021-4-38-41) | References ORCID | 0.00 | 0 |
| 533 | Determination of destruction cause of experimental mill roll… (10.21122/1683-6065-2021-4-50-54) | ORCID | 0.00 | 0 |
| 534 | Technical and economic advantages of using elongating mandre… (10.21122/1683-6065-2021-4-55-58) | ORCID | 0.00 | 0 |
| 535 | Selection of the chemical composition of steels and their th… (10.21122/1683-6065-2021-4-59-65) | ORCID | 0.00 | 0 |
| 536 | Preparation, composition, structure and properties of mechan… (10.21122/1683-6065-2021-4-70-78) | ORCID | 0.00 | 0 |
| 537 | Quality of manufacturing of gears from sparingly alloyed ste… (10.21122/1683-6065-2022-1-113-120) | ORCID | 0.00 | 0 |
| 538 | Main directions of development of materials science for crea… (10.21122/1683-6065-2022-1-142-146) | References ORCID | 0.00 | 0 |
| 539 | Thermodynamic analysis of casting titanium alloys is the bas… (10.21122/1683-6065-2022-1-25-31) | ORCID | 0.00 | 0 |
| 540 | Determination of the optimal horizontal boring mill for the… (10.21122/1683-6065-2022-1-55-60) | References ORCID | 0.00 | 0 |
| 541 | The effect of zirconium on the strength cold-deformed reinfo… (10.21122/1683-6065-2022-1-61-63) | ORCID | 0.00 | 0 |
| 542 | The principle of calculating the consumption rates of carbon… (10.21122/1683-6065-2022-1-70-72) | ORCID | 0.00 | 0 |
| 543 | Development of a methodology for optimizing the component co… (10.21122/1683-6065-2022-1-78-81) | Abstract ORCID | 0.00 | 0 |
| 544 | Automated system for deploying operating systems using LAN (… (10.21122/1683-6065-2022-1-82-85) | References ORCID | 0.00 | 0 |
| 545 | Data exchange between the SAP ERP system and local systems o… (10.21122/1683-6065-2022-1-86-88) | References ORCID | 0.00 | 0 |
| 546 | Web-traffic filtering system (10.21122/1683-6065-2022-1-89-90) | References ORCID | 0.00 | 0 |
| 547 | Laser treatment impact on the fabric 07C11-KV surface and it… (10.21122/1683-6065-2022-1-91-95) | ORCID | 0.00 | 0 |
| 548 | Method of temperature control and duration of aging of beryl… (10.21122/1683-6065-2022-2-104-110) | Abstract ORCID | 0.00 | 0 |
| 549 | Investigation of the properties of protective compositions c… (10.21122/1683-6065-2022-2-118-122) | References ORCID | 0.00 | 0 |
| 550 | Mechanisms of phase transformations in iron (10.21122/1683-6065-2022-2-15-17) | ORCID | 0.00 | 0 |
| 551 | Reduction of liquid metal heat losses is the key to the effi… (10.21122/1683-6065-2022-2-26-30) | Abstract ORCID | 0.00 | 0 |
| 552 | Metal consumption rates in rolling production (10.21122/1683-6065-2022-2-40-43) | References ORCID | 0.00 | 0 |
| 553 | Installation for low‑deformation welding of stainless steels… (10.21122/1683-6065-2022-2-54-58) | ORCID | 0.00 | 0 |
| 554 | Aluminum composites based on high‑strength alloy B95 treated… (10.21122/1683-6065-2022-2-68-77) | ORCID | 0.00 | 0 |
| 555 | Measurement of aluminum alloys plasticity under their dynami… (10.21122/1683-6065-2022-2-84-90) | ORCID | 0.00 | 0 |
| 556 | Some aspects of manufacturing basic machine parts from modul… (10.21122/1683-6065-2022-2-9-14) | ORCID | 0.00 | 0 |
| 557 | New directions processing of technogenic waste of the copper… (10.21122/1683-6065-2022-3-101-107) | ORCID | 0.00 | 0 |
| 558 | Using Docker virtual containers to launch services (10.21122/1683-6065-2022-3-108-111) | References ORCID | 0.00 | 0 |
| 559 | Application of statistical methods of cast iron castings qua… (10.21122/1683-6065-2022-3-20-26) | ORCID | 0.00 | 0 |
| 560 | Kinetics of steel casting solidification during vertical con… (10.21122/1683-6065-2022-3-36-39) | ORCID | 0.00 | 0 |
| 561 | Basic principles of the continuous casting technology develo… (10.21122/1683-6065-2022-3-48-52) | ORCID | 0.00 | 0 |
| 562 | OJSC «BSW – Management Company of Holding «BMC» Stable expor… (10.21122/1683-6065-2022-3-58-60) | References ORCID | 0.00 | 0 |
| 563 | An integrated approach to solving the technological problem… (10.21122/1683-6065-2022-3-83-90) | ORCID | 0.00 | 0 |
| 564 | Increasing the durability of cold forging dies hardening wit… (10.21122/1683-6065-2022-3-91-95) | ORCID | 0.00 | 0 |
| 565 | Formation of the transition zone “matrix alloy – reinforcing… (10.21122/1683-6065-2022-3-96-100) | ORCID | 0.00 | 0 |
| 566 | Influence of electron‑beam surfacing modes on thickness and… (10.21122/1683-6065-2022-4-101-107) | ORCID | 0.00 | 0 |
| 567 | Structure and properties of Co‑Cr alloys for biocompatible m… (10.21122/1683-6065-2022-4-108-114) | ORCID | 0.00 | 0 |
| 568 | Mechatronic‑modular production of machine tools – is a funct… (10.21122/1683-6065-2022-4-12-18) | ORCID | 0.00 | 0 |
| 569 | Improvement of thermocyclic treatment technology to increase… (10.21122/1683-6065-2022-4-123-127) | ORCID | 0.00 | 0 |
| 570 | Assessment of environmental damage caused by the storage of… (10.21122/1683-6065-2022-4-128-131) | ORCID | 0.00 | 0 |
| 571 | Methodology for assessing the dustiness of the air environme… (10.21122/1683-6065-2022-4-132-136) | ORCID | 0.00 | 0 |
| 572 | On the issue of the artistic casting production on an indust… (10.21122/1683-6065-2022-4-38-40) | ORCID | 0.00 | 0 |
| 573 | Determination of the reasons for the rupture of links in the… (10.21122/1683-6065-2022-4-47-50) | ORCID | 0.00 | 0 |
| 574 | Experience in the production of wire rods made of steel grad… (10.21122/1683-6065-2022-4-55-57) | ORCID | 0.00 | 0 |
| 575 | Study and development of methods for predicting the physical… (10.21122/1683-6065-2022-4-58-62) | ORCID | 0.00 | 0 |
| 576 | Technology and equipment of roll straightening of sheet meta… (10.21122/1683-6065-2022-4-70-78) | ORCID | 0.00 | 0 |
| 577 | Cast composite materials: the state and prospects of obtaini… (10.21122/1683-6065-2022-4-79-87) | ORCID | 0.00 | 0 |
| 578 | Stamping of a complex profile part made of hard‑to‑form allo… (10.21122/1683-6065-2022-4-97-100) | ORCID | 0.00 | 0 |
| 579 | The 30th International Scientific and Technical Conference “… (10.21122/1683-6065-2023-1-11-18) | References ORCID | 0.00 | 0 |
| 580 | Structural features of a composite material produced by elec… (10.21122/1683-6065-2023-1-118-125) | ORCID | 0.00 | 0 |
| 581 | Technological aspects of processing steel products in powder… (10.21122/1683-6065-2023-1-124-127) | ORCID | 0.00 | 0 |
| 582 | Priority areas of professional development and retraining of… (10.21122/1683-6065-2023-1-143-145) | References ORCID | 0.00 | 0 |
| 583 | 74th World Foundry Congress (10.21122/1683-6065-2023-1-19-25) | ORCID | 0.00 | 0 |
| 584 | Features and practical experience in obtaining complex profi… (10.21122/1683-6065-2023-1-41-46) | ORCID | 0.00 | 0 |
| 585 | Influence of gases on casting expansion processes during the… (10.21122/1683-6065-2023-1-47-50) | ORCID | 0.00 | 0 |
| 586 | Influence of hydrogen on crystallization of cast magnesium a… (10.21122/1683-6065-2023-1-58-61) | ORCID | 0.00 | 0 |
| 587 | Influence of various thermal conditions on the composition o… (10.21122/1683-6065-2023-1-62-67) | ORCID | 0.00 | 0 |
| 588 | Comprehensive study of characteristic signs of defects detec… (10.21122/1683-6065-2023-1-69-72) | ORCID | 0.00 | 0 |
| 589 | Status, problems and development prospects of JSC “Uzmetkomb… (10.21122/1683-6065-2023-1-79-84) | References ORCID | 0.00 | 0 |
| 590 | Investigation of localization of plastic deformation during… (10.21122/1683-6065-2023-1-81-87) | ORCID | 0.00 | 0 |
| 591 | About the problems and results of obtaining products from te… (10.21122/1683-6065-2023-1-88-95) | ORCID | 0.00 | 0 |
| 592 | Obtaining mechanically fused modifying ligatures with a high… (10.21122/1683-6065-2023-1-96-103) | ORCID | 0.00 | 0 |
| 593 | Study of changes in the structure of zirconium alloy E125 af… (10.21122/1683-6065-2023-2-111-118) | ORCID | 0.00 | 0 |
| 594 | New chemical elements dynamic synthesis in ultra-deep penetr… (10.21122/1683-6065-2023-2-119-124) | ORCID | 0.00 | 0 |
| 595 | A study of the workers’ working conditions in areas of the m… (10.21122/1683-6065-2023-2-125-128) | ORCID | 0.00 | 0 |
| 596 | Mechanisms of influence of modifiers on crystallization of t… (10.21122/1683-6065-2023-2-17-20) | ORCID | 0.00 | 0 |
| 597 | Crystallization features of casting alloys (10.21122/1683-6065-2023-2-21-24) | ORCID | 0.00 | 0 |
| 598 | Production of pyrolytic carbon from waste of rubber-containi… (10.21122/1683-6065-2023-2-25-30) | ORCID | 0.00 | 0 |
| 599 | About the problems and results of obtaining products from te… (10.21122/1683-6065-2023-2-45-51) | ORCID | 0.00 | 0 |
| 600 | Annealing of work pieces of hypereutectoid grades of steels (10.21122/1683-6065-2023-2-52-54) | ORCID | 0.00 | 0 |
| 601 | Making up the planned initial cost of finishrd products at O… (10.21122/1683-6065-2023-2-70-74) | ORCID | 0.00 | 0 |
| 602 | The influence of the source material and the method of formi… (10.21122/1683-6065-2023-2-75-83) | ORCID | 0.00 | 0 |
| 603 | Может ли звук упрочнять металлы и сплавы? (10.21122/1683-6065-2023-3-111) | ORCID | 0.00 | 0 |
| 604 | Об энергии аэродинамического звукового воздействия (10.21122/1683-6065-2023-3-116-117) | ORCID | 0.00 | 0 |
| 605 | On the stability of aluminum oxide in carbon steel melts (10.21122/1683-6065-2023-3-24-27) | ORCID | 0.00 | 0 |
| 606 | Influence of hydrogen on formation of primary structures of… (10.21122/1683-6065-2023-3-49-52) | ORCID | 0.00 | 0 |
| 607 | Ensuring sustainable development of the metallurgical indust… (10.21122/1683-6065-2023-3-53-54) | References ORCID | 0.00 | 0 |
| 608 | Modernization of ladle refining area in order to expand the… (10.21122/1683-6065-2023-3-53-58) | References ORCID | 0.00 | 0 |
| 609 | Technology of calibrated wire production for bearing rolling… (10.21122/1683-6065-2023-3-59-64) | ORCID | 0.00 | 0 |
| 610 | Development of high-speed installation design and wire galva… (10.21122/1683-6065-2023-3-65-71) | ORCID | 0.00 | 0 |
| 611 | Composite welds reinforced in volume with lanthanides (10.21122/1683-6065-2023-3-72-78) | ORCID | 0.00 | 0 |
| 612 | The use of high-strength cast iron with a ferritic structure… (10.21122/1683-6065-2023-3-79-85) | ORCID | 0.00 | 0 |
| 613 | Working conditions at the workplaces of the charge sections… (10.21122/1683-6065-2023-3-86-91) | ORCID | 0.00 | 0 |
| 614 | Working conditions at the workplaces of core sections of fou… (10.21122/1683-6065-2023-3-92-99) | ORCID | 0.00 | 0 |
| 615 | Application of magnetic‑pulse treatment in electrode arc wel… (10.21122/1683-6065-2023-4-101-108) | ORCID | 0.00 | 0 |
| 616 | Working conditions of an operator‑caster on automatic machin… (10.21122/1683-6065-2023-4-117-121) | ORCID | 0.00 | 0 |
| 617 | Working conditions of agricultural workers on mixing plant a… (10.21122/1683-6065-2023-4-122-126) | ORCID | 0.00 | 0 |
| 618 | A modern foundry is a prototype of energy–efficient, environ… (10.21122/1683-6065-2023-4-25-29) | ORCID | 0.00 | 0 |
| 619 | About solid solutions of alloys (10.21122/1683-6065-2023-4-52-55) | ORCID | 0.00 | 0 |
| 620 | The experience of producing low‑carbon steel with low silico… (10.21122/1683-6065-2023-4-56-60) | ORCID | 0.00 | 0 |
| 621 | Development and implementation of grade 62PP steel productio… (10.21122/1683-6065-2023-4-61-65) | ORCID | 0.00 | 0 |
| 622 | Increasing the efficiency of microalloying steel with boron‑… (10.21122/1683-6065-2023-4-66-71) | ORCID | 0.00 | 0 |
| 623 | Influence of the feed rate value on the distribution of the… (10.21122/1683-6065-2023-4-81-87) | ORCID | 0.00 | 0 |
| 624 | Plasma spraying of Al2O3‑Al composite coatings (10.21122/1683-6065-2023-4-88-93) | ORCID | 0.00 | 0 |
| 625 | Based on the results of the 31st International Scientific an… (10.21122/1683-6065-2023-4-9-15) | References ORCID | 0.00 | 0 |
| 626 | Influence of technological factors of melting on the structu… (10.21122/1683-6065-2023-4-94-100) | ORCID | 0.00 | 0 |
| 627 | The mechanism of recrystallization of carbon steels (10.21122/1683-6065-2024-1-13-15) | ORCID | 0.00 | 0 |
| 628 | About the crystallization centers of metal melts (10.21122/1683-6065-2024-1-32-35) | ORCID | 0.00 | 0 |
| 629 | On the issue of the application of cooling mixtures (10.21122/1683-6065-2024-1-36-38) | ORCID | 0.00 | 0 |
| 630 | Development of technology and development of production of r… (10.21122/1683-6065-2024-1-39-46) | ORCID | 0.00 | 0 |
| 631 | Features of microstructure of carbide blanks (10.21122/1683-6065-2024-1-47-50) | ORCID | 0.00 | 0 |
| 632 | Comparative analysis of hot‑rolled sheet rolling process mod… (10.21122/1683-6065-2024-1-55-59) | ORCID | 0.00 | 0 |
| 633 | . Structural aspects of the diverse formation of plastic pro… (10.21122/1683-6065-2024-1-60-62) | ORCID | 0.00 | 0 |
| 634 | Artifacts in metallography: stains on the surface of metallo… (10.21122/1683-6065-2024-1-69-77) | References ORCID | 0.00 | 0 |
| 635 | Magnesium alloys based on the Mg–Al– Mn–Ca system, additiona… (10.21122/1683-6065-2024-1-83-92) | ORCID | 0.00 | 0 |
| 636 | Sprecific of distribution of chemical elements in graphite i… (10.21122/1683-6065-2024-2-106-116) | Abstract ORCID | 0.00 | 0 |
| 637 | Laser deposition of aluminum and magnesium‑based alloys for… (10.21122/1683-6065-2024-2-117-124) | ORCID | 0.00 | 0 |
| 638 | On the thermodynamic equilibrium of thermal casting processe… (10.21122/1683-6065-2024-2-12-16) | ORCID | 0.00 | 0 |
| 639 | Study of glued elements of model kits under atmospheric cond… (10.21122/1683-6065-2024-2-125-133) | ORCID | 0.00 | 0 |
| 640 | The pressure treatment effect on the high‑strength austemper… (10.21122/1683-6065-2024-2-134-140) | ORCID | 0.00 | 0 |
| 641 | On the motion of a spherical cavity in a melt (10.21122/1683-6065-2024-2-141-145) | ORCID | 0.00 | 0 |
| 642 | Analysis of occupational injuries among workers in foundry w… (10.21122/1683-6065-2024-2-146-153) | ORCID | 0.00 | 0 |
| 643 | Adaptation of fire safety norms at an enterprise (10.21122/1683-6065-2024-2-154-137) | References ORCID | 0.00 | 0 |
| 644 | Determining the degree of atmospheric emissions impact gener… (10.21122/1683-6065-2024-2-158-166) | ORCID | 0.00 | 0 |
| 645 | Thermodynamics of the substantial universe (10.21122/1683-6065-2024-2-167-169) | ORCID | 0.00 | 0 |
| 646 | Energy calculation aerodynamic sound impact on the atoms of… (10.21122/1683-6065-2024-2-170-172) | ORCID | 0.00 | 0 |
| 647 | Modern russian equipment for No‑Bake processes (10.21122/1683-6065-2024-2-23-28) | ORCID | 0.00 | 0 |
| 648 | Combined use of kaolin and bentonite molding clays (10.21122/1683-6065-2024-2-32-35) | ORCID | 0.00 | 0 |
| 649 | The mechanism of recrystallization of binary aluminum and ti… (10.21122/1683-6065-2024-2-36-39) | ORCID | 0.00 | 0 |
| 650 | Improving the technology of producing seamless hot‑rolled pi… (10.21122/1683-6065-2024-2-40-43) | ORCID | 0.00 | 0 |
| 651 | Processes occurring during the synthesis of wollastonite‑con… (10.21122/1683-6065-2024-2-44-48) | ORCID | 0.00 | 0 |
| 652 | Manufacturing of die blanks from hard alloy granulated mixtu… (10.21122/1683-6065-2024-2-49-53) | ORCID | 0.00 | 0 |
| 653 | The influence of dispersing structure in multiple drawing on… (10.21122/1683-6065-2024-2-54-56) | ORCID | 0.00 | 0 |
| 654 | Prospects of coating application for improving surface prope… (10.21122/1683-6065-2024-2-63-71) | ORCID | 0.00 | 0 |
| 655 | Investigation of low temperature effects on the surface of T… (10.21122/1683-6065-2024-2-82-87) | ORCID | 0.00 | 0 |
| 656 | Investigation of microstructure and mechanical properties of… (10.21122/1683-6065-2024-2-88-95) | ORCID | 0.00 | 0 |
| 657 | Research on technological parameters affecting the quality o… (10.21122/1683-6065-2024-2-96-105) | ORCID | 0.00 | 0 |
| 658 | Repair of mandrels of a continuous mill through the use of a… (10.21122/1683-6065-2024-3-18-22) | ORCID | 0.00 | 0 |
| 659 | Selection of internal design of crystallizer sleeves for con… (10.21122/1683-6065-2024-3-23-28) | ORCID | 0.00 | 0 |
| 660 | Deoxidation of steel with calcium carbide. Influence of calc… (10.21122/1683-6065-2024-3-29-34) | ORCID | 0.00 | 0 |
| 661 | Structural heredity in the casting of eutectic cast iron (10.21122/1683-6065-2024-3-41-44) | ORCID | 0.00 | 0 |
| 662 | Advanced tin recycling technology (10.21122/1683-6065-2024-3-45-50) | ORCID | 0.00 | 0 |
| 663 | Control of properties of core mixes manufactured by Cold‑box… (10.21122/1683-6065-2024-3-51-56) | ORCID | 0.00 | 0 |
| 664 | Secondary transformations in the structure of grey cast iron (10.21122/1683-6065-2024-3-57-60) | ORCID | 0.00 | 0 |
| 665 | High‑energy treatment of steel billet with coating from high… (10.21122/1683-6065-2024-3-66-71) | Abstract ORCID | 0.00 | 0 |
| 666 | Algorithm for optimization of cold‑rolled pipe rolling route… (10.21122/1683-6065-2024-3-72-79) | ORCID | 0.00 | 0 |
| 667 | Radio‑absorbing composite materials and coatings based on al… (10.21122/1683-6065-2024-3-80-86) | ORCID | 0.00 | 0 |
| 668 | The influence of acid treatment on the adsorption‑structural… (10.21122/1683-6065-2024-3-87-94) | ORCID | 0.00 | 0 |
| 669 | Features of water crystallization (10.21122/1683-6065-2024-3-95-97) | ORCID | 0.00 | 0 |
| 670 | About the structure of water (10.21122/1683-6065-2024-3-98-99) | ORCID | 0.00 | 0 |
| 671 | Nanostructuring during crystallization of cast aluminum‑copp… (10.21122/1683-6065-2024-4-10-12) | ORCID | 0.00 | 0 |
| 672 | Porous materials from sponge titanium powders with increased… (10.21122/1683-6065-2024-4-109-115) | ORCID | 0.00 | 0 |
| 673 | Study of the structure and properties of zinc coating based… (10.21122/1683-6065-2024-4-116-120) | ORCID | 0.00 | 0 |
| 674 | Surface morphology, internal structure and nucleation mechan… (10.21122/1683-6065-2024-4-121-129) | ORCID | 0.00 | 0 |
| 675 | Current state of mining and processing of bentonite clays of… (10.21122/1683-6065-2024-4-13-16) | ORCID | 0.00 | 0 |
| 676 | Synthesis and study of properties of filter media based on m… (10.21122/1683-6065-2024-4-135-141) | ORCID | 0.00 | 0 |
| 677 | Influence of cobalt on the properties of casting alloys (10.21122/1683-6065-2024-4-17-24) | ORCID | 0.00 | 0 |
| 678 | Manufacture of consumable patterns using additive sheet lami… (10.21122/1683-6065-2024-4-25-32) | ORCID | 0.00 | 0 |
| 679 | The formation and development of OJSC “BSW – Management Comp… (10.21122/1683-6065-2024-4-33-46) | ORCID | 0.00 | 0 |
| 680 | Ways to improve the technology for producing axle steel grad… (10.21122/1683-6065-2024-4-47-51) | ORCID | 0.00 | 0 |
| 681 | Research on factors affecting hydrogen content in steel and… (10.21122/1683-6065-2024-4-52-56) | ORCID | 0.00 | 0 |
| 682 | Determination of the cause of local decarburization in 20G2R… (10.21122/1683-6065-2024-4-57-63) | ORCID | 0.00 | 0 |
| 683 | Influence of the grain size of rolled sparingly alloyed s… (10.21122/1683-6065-2024-4-68-75) | ORCID | 0.00 | 0 |
| 684 | Heat treatment technology for improving wear resistance of h… (10.21122/1683-6065-2024-4-76-79) | ORCID | 0.00 | 0 |
| 685 | Artifacts in metallography: mechanical damage during sample… (10.21122/1683-6065-2024-4-80-84) | ORCID | 0.00 | 0 |
| 686 | Study of metal refining during electric arc welding (10.21122/1683-6065-2024-4-95-98) | ORCID | 0.00 | 0 |
| 687 | Modeling of the internal structure of a spherical graphite i… (10.21122/1683-6065-2024-4-99-108) | ORCID | 0.00 | 0 |
| 688 | Influence of the colloidal-chemical state of chromium ions o… (10.21122/1683-6065-2025-1-105-115) | ORCID | 0.00 | 0 |
| 689 | Analyzing the dynamics of changes in demand, production, and… (10.21122/1683-6065-2025-1-116-122) | ORCID | 0.00 | 0 |
| 690 | 75th World foundry congress: new trends in developing of fou… (10.21122/1683-6065-2025-1-16-33) | ORCID | 0.00 | 0 |
| 691 | On the crystallization of austenitic carbide eutectic of chr… (10.21122/1683-6065-2025-1-34-39) | ORCID | 0.00 | 0 |
| 692 | The influence of magnetite-based additives on the physicomec… (10.21122/1683-6065-2025-1-40-46) | ORCID | 0.00 | 0 |
| 693 | Usagt study of creating model kits parts with the help of po… (10.21122/1683-6065-2025-1-47-53) | ORCID | 0.00 | 0 |
| 694 | Ferrous metal waste, their safe and economical processing (10.21122/1683-6065-2025-1-58-66) | ORCID | 0.00 | 0 |
| 695 | Practical application of correlation-regression analysis res… (10.21122/1683-6065-2025-1-73-80) | ORCID | 0.00 | 0 |
| 696 | Structural sensitivity of strengthening and ductility indice… (10.21122/1683-6065-2025-1-81-84) | ORCID | 0.00 | 0 |
| 697 | Comparative analysis of surface modeling in computer-aided d… (10.21122/1683-6065-2025-1-85-89) | ORCID | 0.00 | 0 |
| 698 | Artifacts in metallography: mechanical damage during sample… (10.21122/1683-6065-2025-1-90-97) | ORCID | 0.00 | 0 |
| 699 | Methodology for determining the amount of ferrite and pearli… (10.21122/1683-6065-2025-1-98-104) | ORCID | 0.00 | 0 |
| 700 | Assessment of the working conditions of the adjuster of mold… (10.21122/1683-6065-2025-2-102-106) | ORCID | 0.00 | 0 |
| 701 | Foundry production optimization with PolygonSoft computer si… (10.21122/1683-6065-2025-2-14-22) | ORCID | 0.00 | 0 |
| 702 | Strength formation of clay‑bonded sand mixtures (10.21122/1683-6065-2025-2-23-28) | ORCID | 0.00 | 0 |
| 703 | Influence of automation of the process of producing castings… (10.21122/1683-6065-2025-2-29-33) | ORCID | 0.00 | 0 |
| 704 | Development of technologies and equipment for manufacturing… (10.21122/1683-6065-2025-2-34-39) | References ORCID | 0.00 | 0 |
| 705 | Crystallization of gray cast irons (10.21122/1683-6065-2025-2-40-45) | ORCID | 0.00 | 0 |
| 706 | Release coating for obtaining sand‑resin rods manufactured u… (10.21122/1683-6065-2025-2-46-51) | ORCID | 0.00 | 0 |
| 707 | Electrochemical etching technique for analyzing the shape an… (10.21122/1683-6065-2025-2-52-63) | ORCID | 0.00 | 0 |
| 708 | Changing the mechanical characteristics of cracking pipes du… (10.21122/1683-6065-2025-2-64-70) | ORCID | 0.00 | 0 |
| 709 | Melting of multicomponent, refractory alloys in an induction… (10.21122/1683-6065-2025-2-71-75) | ORCID | 0.00 | 0 |
| 710 | Trends in the use of stainless steels in the medical industr… (10.21122/1683-6065-2025-2-76-82) | ORCID | 0.00 | 0 |
| 711 | Food stainless steel. Characteristics. Spheres of applicatio… (10.21122/1683-6065-2025-2-83-91) | ORCID | 0.00 | 0 |
| 712 | Implementation experience of graphitizing modification techn… (10.21122/1683-6065-2025-2-92-95) | References ORCID | 0.00 | 0 |
| 713 | Working conditions in foundry shops with batch production (10.21122/1683-6065-2025-2-96-101) | ORCID | 0.00 | 0 |
| 714 | On the issue of studying the corrosion resistance of zinc co… (10.21122/1683-6065-2025-3-120-128) | ORCID | 0.00 | 0 |
| 715 | Assessment of the working conditions of the mold assembly wo… (10.21122/1683-6065-2025-3-129-134) | ORCID | 0.00 | 0 |
| 716 | Development of a technology for producing an Al–Cu–Si solder… (10.21122/1683-6065-2025-3-13-18) | ORCID | 0.00 | 0 |
| 717 | Advantages of using medium-frequency induction crucible furn… (10.21122/1683-6065-2025-3-19-23) | ORCID | 0.00 | 0 |
| 718 | Thermodynamics of modification of hypereutectic silumin by c… (10.21122/1683-6065-2025-3-24-28) | ORCID | 0.00 | 0 |
| 719 | Analysis of properties of casting rods manufactured by the f… (10.21122/1683-6065-2025-3-29-35) | ORCID | 0.00 | 0 |
| 720 | Pressure treatment of aluminum–magnesium alloys solidified u… (10.21122/1683-6065-2025-3-36-49) | ORCID | 0.00 | 0 |
| 721 | Study of shrinkage processes in the mold during casting of c… (10.21122/1683-6065-2025-3-50-55) | ORCID | 0.00 | 0 |
| 722 | Application of poka-yoke principle in software and implement… (10.21122/1683-6065-2025-3-61-65) | ORCID | 0.00 | 0 |
| 723 | Some aspects of bead wire design for tires (10.21122/1683-6065-2025-3-66-68) | References ORCID | 0.00 | 0 |
| 724 | Heat-resistant stainless steels: local and foreign equivalen… (10.21122/1683-6065-2025-3-80-87) | ORCID | 0.00 | 0 |
| 725 | Analysis of stainless steel analogs to AISI (USA), EN (Europ… (10.21122/1683-6065-2025-3-88-97) | ORCID | 0.00 | 0 |
| 726 | Ausferritic ductile irons (adi): analysis of modern alloying… (10.21122/1683-6065-2025-3-98-113) | ORCID | 0.00 | 0 |
| 727 | Investigation of the scale of environmental pollution from… (10.21122/1683-6065-2025-4-105-110) | Abstract ORCID | 0.00 | 0 |
| 728 | Crystallization of nickel alloys (10.21122/1683-6065-2025-4-19-22) | Abstract ORCID | 0.00 | 0 |
| 729 | Methodological approaches to determining the suitability of… (10.21122/1683-6065-2025-4-23-27) | Abstract ORCID | 0.00 | 0 |
| 730 | Study of solid‑state reduction of iron from copper smelting… (10.21122/1683-6065-2025-4-28-34) | Abstract ORCID | 0.00 | 0 |
| 731 | Experimental research into feasibility of cellulose‑based sh… (10.21122/1683-6065-2025-4-35-39) | Abstract ORCID | 0.00 | 0 |
| 732 | Study of prematurely destroyed grinding material of a rod mi… (10.21122/1683-6065-2025-4-44-49) | Abstract ORCID | 0.00 | 0 |
| 733 | Influence of banded structure on anisotropy of mechanical pr… (10.21122/1683-6065-2025-4-50-55) | Abstract ORCID | 0.00 | 0 |
| 734 | The influence of ultrasonic vibrations on walls deposited us… (10.21122/1683-6065-2025-4-56-63) | Abstract ORCID | 0.00 | 0 |
| 735 | Improvement of mechanical properties of AK9 aluminum alloys… (10.21122/1683-6065-2025-4-64-72) | Abstract ORCID | 0.00 | 0 |
| 736 | Prospects for using high‑alloy austenitic steel powder produ… (10.21122/1683-6065-2025-4-73-81) | Abstract ORCID | 0.00 | 0 |
| 737 | Assessing the nature and dynamics of failure of glue‑bound j… (10.21122/1683-6065-2025-4-82-92) | Abstract ORCID | 0.00 | 0 |
| 738 | Calculation of the influence of heat treatment and phase tra… (10.21122/1683-6065-2025-4-93-104) | Abstract ORCID | 0.00 | 0 |
| 739 | Organization of technical ceramics production for the machin… (10.21122/1683-6065-2026-1-104-109) | Abstract ORCID | 0.00 | 0 |
| 740 | Comparative modeling of the process of filling a vertical an… (10.21122/1683-6065-2026-1-110-123) | Abstract ORCID | 0.00 | 0 |
| 741 | Analysis of modern methods of restoration and strengthening… (10.21122/1683-6065-2026-1-124-134) | Abstract ORCID | 0.00 | 0 |
| 742 | An integrated approach to solving the technological problem… (10.21122/1683-6065-2026-1-135-141) | Abstract ORCID | 0.00 | 0 |
| 743 | Modern methods of solving production problems in the field o… (10.21122/1683-6065-2026-1-142-147) | Abstract ORCID | 0.00 | 0 |
| 744 | Bimetal coatings received wia magnetic‑electric hardening (10.21122/1683-6065-2026-1-148-152) | Abstract ORCID | 0.00 | 0 |
| 745 | Application of biochar for intensifying powder carburizing a… (10.21122/1683-6065-2026-1-153-159) | Abstract ORCID | 0.00 | 0 |
| 746 | Evaluation of the brittle‑ductile state of a welded joint of… (10.21122/1683-6065-2026-1-160-171) | Abstract ORCID | 0.00 | 0 |
| 747 | Features of the hereditary influence of the structure of Al–… (10.21122/1683-6065-2026-1-40-47) | Abstract ORCID | 0.00 | 0 |
| 748 | Reduction of shrinkage and gas defects during high‑pressure… (10.21122/1683-6065-2026-1-48-53) | Abstract ORCID | 0.00 | 0 |
| 749 | Nanostructured crystallization of metal melts (10.21122/1683-6065-2026-1-54-56) | Abstract ORCID | 0.00 | 0 |
| 750 | Features of horizontal continuous cast iron casting technolo… (10.21122/1683-6065-2026-1-57-61) | Abstract ORCID | 0.00 | 0 |
| 751 | Influence of technological modes of aluminum alloy productio… (10.21122/1683-6065-2026-1-62-66) | Abstract ORCID | 0.00 | 0 |
| 752 | Development of a technology for casting a “swirl” from a hea… (10.21122/1683-6065-2026-1-67-73) | Abstract ORCID | 0.00 | 0 |
| 753 | Impact of sample preparation on information content of metal… (10.21122/1683-6065-2026-1-74-80) | Abstract ORCID | 0.00 | 0 |
| 754 | Metallographic structure of the tape after two‑roll hardenin… (10.21122/1683-6065-2026-1-81-86) | Abstract ORCID | 0.00 | 0 |
| 755 | Rationalization of structures for protection of tundish duri… (10.21122/1683-6065-2026-1-87-91) | Abstract ORCID | 0.00 | 0 |
| 756 | Deformation conditions of the drawing process of high‑tensil… (10.21122/1683-6065-2026-1-92-97) | Abstract ORCID | 0.00 | 0 |
| 757 | High‑entropy alloys with shape memory based on the Ti–Ni–Co–… (10.21122/1683-6065-2026-1-98-103) | Abstract ORCID | 0.00 | 0 |